Wagner Flexio 590 Manual

Wagner Spraymaling Flexio 590

Læs gratis den danske manual til Wagner Flexio 590 (24 sider) i kategorien Spraymaling. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Wagner Flexio 590, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

EnglishFrançaisEspañol

0416 • Form No. 0529835F

Owner’s Manual

Read this manual for complete instructions

Français (page 17) / Español (página 33)

Contents

2 Important Safety Information

4Controls and Functions

6Material Preparation

7Assembly

8 Power and Material Controls

9 Spray Pattern Adjustment

10 Proper Spraying Technique

12 Cleanup

14 Reassembly

15 Maintenance

16 Troubleshooting

49 Parts List

56 Warranty

Questions?

Call Wagner Technical Service at:

1-800-328-8251

www.wagnerspraytech.com

English

Important Safety Information

Read all safety information before

operating the equipment. Save these

instructions.

Indicates a hazardous situation which,

if not avoided, could result in death or

serious injury.

To reduce the risks of re or explosion,

electrical shock and the injury to

persons, read and understand all

instructions included in this manual. Be

familiar with the controls and proper

usage of the equipment.

Grounding Instructions

This product must be grounded. In the event of an

electrical short circuit, grounding reduces the risk

of electric shock by providing an escape wire for

the electric current. This product is equipped with a

cord having a grounding wire with an appropriate

grounding plug. The plug must be plugged into an

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

WARNING - Improper installation of

the grounding plug can result in a risk

of electric shock.

If repair or replacement of the cord or plug is

necessary, do not connect the green grounding wire

to either at blade terminal. The wire with insulation

having a green outer surface with or without yellow

stripes is the grounding wire and must be connected

to the grounding pin.

Check with a qualied electrician or serviceman

if the grounding instructions are not completely

understood, or if you are in doubt as to whether the

product is properly grounded. Do not modify the

plug provided. If the plug will not t the outlet, have

the proper outlet installed by a qualied electrician.

This product is for use on a nominal 120 volt

circuit and has a grounding plug that looks like

the plug illustrated below. Make sure that the

product is connected to an outlet having the same

conguration as the plug. No adapter should be

used with this product.

Grounded Outlet

Grounding Pin

Cover for grounded outlet box

WARNING - To reduce the risk

of re or explosion:

1. Do not spray ammable or combustible

materials near an open ame, pilot lights

or sources of ignition such as hot objects,

cigarettes, motors, electrical equipment and

electrical appliances. Avoid creating sparks

from connecting and disconnecting power

cords.

2. For use with only water-based or mineral

spirit-type materials with a minimum ash point

of 38ºC (100º F) — Do not spray or clean with

liquids having a ash point of less than 38ºC

(100º F). Flash point is the temperature at which

a uid can produce enough vapor to ignite.

3. Verify that all containers and collection systems

are grounded to prevent static discharge.

4. Connect to a grounded outlet and use

grounded extension cords (electric models

only). Do not use a 3 to 2 adapter.

5. Keep spray area well ventilated. Keep a good

supply of fresh air moving through the area

to keep the air within the spray area free from

accumulation of ammable vapors.

6. Do not smoke in the spray area.

7. Do not operate light switches, engines, or

similar spark producing products in the spray

area.

8. Keep area clean and free of paint or solvent

containers, rags, and other ammable materials.

9. Know the contents of the paint and solvents

being sprayed. Read all Material Safety Data

Sheets (MSDS) and container labels provided

with the paints and solvents. Follow the paint

and solvent manufacture’s safety instructions.

10. Fire extinguisher equipment shall be present

and working.

Produkt Specifikationer

Mærke:	Wagner
Kategori:	Spraymaling
Model:	Flexio 590

Har du brug for hjælp?

Hvis du har brug for hjælp til Wagner Flexio 590 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Spraymaling Wagner Manualer

Wagner Flexio 690 Manual

12 Juli 2024

Wagner W 240 Manual

6 Maj 2024

Wagner Airless HEA Control Series 250M Manual

30 Marts 2024

Wagner W 95 Manual

5 Februar 2024

Wagner WallPerfect W 925 E Manual

22 December 2023

Wagner WallPerfect Flexio 990 Manual

22 Oktober 2023

Wagner W 150 Manual

21 Oktober 2023

Wagner WallSpray Manual

30 August 2023

Wagner Project 115 Manual

8 Juli 2023

Wagner W 400 WallSprayer Manual

17 Juni 2023

Spraymaling Manualer

Nyeste Spraymaling Manualer

9 Juni 2025

8 Juni 2025

7 Juni 2025

6 Juni 2025

6 Juni 2025

4 Juni 2025

1 Juni 2025

31 Maj 2025

31 Maj 2025

31 Maj 2025