
The Janus is a true bypass, dual joystick controlled 
Tremolo/Fuzz pedal that allows you to create a 
landscape of distorted textures.  Both the Tremolo 
and the Fuzz can be isolated and used alone, but 
can also be used together in series creating thick, 
textures with a lot of movement.  Each joystick has 
a separate X and Y axis that has designated 
controls.  The Tremolo joystick controls the rate 
and depth while the Fuzz joystick controls the 
amount of fuzz and the tone.  There are individual 
Volume controls for both effects and a Blend 
control for the Fuzz that allows the user to mix 
unaffected signal with the effected fuzz signal.  
The joystick controls make the Janus a great 
option for guitars, vocals, keys or tracks.
Trem Level - Adjusts the output level of the 
Trem Joystick - Left to Right adjusts the depth of 
the Tremolo effect, to the left being minimal depth 
and to the right being maximum depth.  Down to 
Up adjusts the rate of the Tremolo effect, Down 
being minimal rate and Up being maximum rate.  
The pink LED serves as a visual
 indicator for the Trem rate.
Trem On/Off True Bypass Switch - Press switch 
to turn on (effect mode) and turn off (bypass). 
When the Trem is in effect mode, the white LED 
will turn on. In bypass, the white LED will be off.
Bass Toggle - When activated, boosts the low 
end/bass. To activate, switch the toggle to the left. 
Fuzz Level - Adjusts the output level of the 
Fuzz Blend - Adjusts the mix between clean
signal and Fuzz signal, allowing for transparent, 
cleaner guitar tone with fuzz underneath.
Fuzz Joystick - Left to Right adjusts the amount 
of Fuzz/Gain/Distortion, Left being the minimal 
amount of Fuzz and Right being the maximum 
amount of Fuzz.  Down and Up adjusts the 
Tone of the Fuzz effect, Down resulting in 
more bass and Up resulting in more treble. 
Mode Toggle - Switches between arrangements 
of clipping diodes to create an assortment of
Fuzz On/Off True Bypass Switch - Press 
switch to turn on (effect mode) and turn off 
(bypass). When the Fuzz is in effect mode, the 
white LED will turn on. In bypass, the white 
Input Jack - Instrument cable to guitar.
Output Jack - Instrument cable to amp.
For additional information go to 
TREM ON/ OFF FUZZ ON/ OFF
Power - Power supply is activated by 
plugging a cable into the input jack.