Walrus Audio Iron Horse Manual


Læs gratis den danske manual til Walrus Audio Iron Horse (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Walrus Audio Iron Horse, eller vil du spørge andre brugere om produktet?

Side 1/2
9 volt DC, Center Neg.
100ma min*
Output Jack
Bypass Switch
Bypass LED
Input Jack
*The use of an isolated p all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Got questions?
Need a repair?
repairs@walrusaudio.com
All our pedals come with a limited lifetime warranty.
walrusaudio.com/pages/warranty-and-repair for more info.
For life advice, refer to Buzzfeed’s top 10 lists.
WALRUSAUDIO.COM
LEVEL – Controls the output level.
TONE Allows specific adjustment of high-end/treble frequencies
Turn clockwise to increase high/treble frequencies and counterclockwise to
decrease high/treble frequencies.
DISTORTION – Adjusts the distortion output. Turn clockwise to increase the
amount of distortion. As it is increased, the signal becomes louder, thicker
and more distorted. Turn counterclockwise to decrease the amount o
distortion.
Si/LED KNOB Blend between Silicon and LED clipping. When the knob
is set to the left, the distorted signal will be using Silicon clipping diodes
adding in a high amount of compression. Rotating the knob to the righ
will bring in LED clipping and a smaller amount of compression. Putting the
knob at noon will blend between the two using different ratios of the Silicon
and LED clipping diodes for more complex clipping sounds.
Note: Since the Si/LED knob is changing the internal gain and clipping style
the other controls will behave slightly differently as well. You will need to
use the volume knob to adjust the overall output up or down depending on
where you have the knob set.
GOT THAT RHYTHM PUNK ENOUGH
ele, Single coils, neck position. SG, Humbuckers, bridge position
vol voltone tonedistortion distortion
The Iron Horse is our take on a classic
distortion circuit that’s thick, punchy,
riffy, and rowdy. With the help of the
Si/LED knob and wide range of the
distortion knob, this true bypass, high-
gain behemoth can be finely tuned for
clear overdriven sounds or let the reigns
loose for a full-on distorted onslaught.
Top mount jacks with soft switch
bypassing and art by David Hüttner
complete the package for a pedal board-
ready distortion machine.
Need a place to start?
Here’s a few settings we like:
SHREDDY MCSHRED
LP, P90s, bridge position.
vol tone distortion


Produkt Specifikationer

Mærke: Walrus Audio
Kategori: Ikke kategoriseret
Model: Iron Horse

Har du brug for hjælp?

Hvis du har brug for hjælp til Walrus Audio Iron Horse stil et spørgsmål nedenfor, og andre brugere vil svare dig