Walrus Audio Julianna Manual

Walrus Audio Ikke kategoriseret Julianna

Læs gratis den danske manual til Walrus Audio Julianna (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Walrus Audio Julianna, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

9 volt DC, Center Neg.

100mA min*

Bypass LED

Mono Out

Bypass Switch

Stereo Out

Rate LED

Mono In

Tap / Expression

Tap Switch

Stereo In

*The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.

Daisy chain power supplies are not recommended.

Got questions or need a repair or want to mail us some cookies? Email help@walrusaudio.com

All our pedals come with a limited lifetime warranty. walrusaudio.com/pages/warranty-and-repair for more info.

MOMENTARY FEATURES

TAP / XPRESS JACK

BYPASS SWITCH - Holding down the Bypass switch, when the pedal is engaged, allows you to set

the secondary LFO rate and control the amount of drift added to the LFO by turning the Rate and Depth

knobs.

TAP SWITCH - Hold down the tap switch to ramp to the secondary LFO rate. If the secondary LFO

rate is faster than the current rate, the pedal will ramp up to it. If the secondary rate is set slower, it will

ramp down.

The Tap/EXP jack can serve as either an external tap input or an expression pedal input. Before using

this jack, be sure to set the internal dip switches to the position that corresponds to the intended use.

If connecting an external tap, make sure it is a normally open source with a latch time of less than

250ms.

To assign an expression pedal, enter assignment mode by holding down both the Bypass and Tap

switches until the bypass LED blinks rapidly. While continuing to hold the switches, turn either the

Depth knob, Rate knob, or both to assign them to be controlled by the expression pedal. To clear an

assignment, enter the assignment mode and exit the mode by releasing both stomp switched without

turning any knobs. Make sure to use a TRS cable to connect the expression pedal, and that the pedal you

are using is conﬁgured to send the control signal on the tip conductor of the cable.

RATE – The Rate knob allows you to control the speed of the main LFO.

SECONDARY FUNCTION: MOMENTARY LFO RATE - The Rate knob also allows you to set the

momentary LFO rate. While the pedal is engaged, hold down the bypass switch and turn the Rate knob.

The Bypass LED will blink at the momentary LFO rate and will turn solid once you release the Bypass

switch, storing your momentary LFO rate setting. See Momentary Features section to learn more.

DEPTH – The Depth knob controls the strength of the chorus and vibrato effect by setting the

amplitude of the LFO.

SECONDARY FUNCTION: DRIFT - The secondary function of the Depth knob sets the amount of

“Drift” applied to the LFO. The Drift feature on the Julianna gently speeds up and slows down the current

rate of the LFO based on the amount of Drift applied. It’s like a little robot is inside your pedal moving

the Rate knob up and down. Lower settings offer a small amount of Drift while higher settings are more

dramatic. To introduce Drift, hold down the Bypass switch, with the pedal engaged and turn the Depth

knob to the desired setting. To turn Drift off, follow the same procedure and set the Depth knob to zero.

LAG – The Lag knob lets you set the center delay time that the LFO modulates around. From smooth,

tight modulation at lower settings, to noisy and nauseating detune at maximum.

D-C-V BLEND – The DCV knob sets the ratio of dry to wet signal through the mono channel of the

Julianna. Traditional mono chorus sounds can be heard with the knob set around noon. Pitch vibrato is

found in the full clockwise position. The ground in between offers unique blends of chorus and vibrato

not commonly found on other chorus pedals.

When both outputs are connected, set the DCV knob to full counterclockwise to send your dry signal to

the mono output and vibrato signal to the stereo output for a traditional stereo chorus sound. Explore

other variations by turning the DCV knob up slightly to add some vibrato signal to the dry output

changing the stereo image.

DIV SWITCH – The Div switch lets you select a quarter note, quarter note triplet, or eighth note

multiplier to scale a tapped in tempo.

NOTE: the div switch only operates on a tapped tempo, not the Rate knob.

SHAPE SWITCH – The Shape toggle lets you select a sine, triangle, or random LFO wave to modulate

the pitch of your signal. There are no rules here. Sine is traditionally used for vibrato tones and triangle for

chorus, but feel free to change it up! The random wave is a true random LFO and is awesome for creating

unpredictable pitch vibrato effects. The random wave combined with the drift effect makes for seasick

unpredictability. Take some Dramamine and give it a try.

BYPASS LED - Illuminated when the effect is engaged and blinks the secondary LFO rate when

holding down the Bypass switch when the pedal is engaged. Note the Julianna remembers its last

known bypass state. If you turn your pedalboard off with the Julianna engaged, the next time you power

it up, it will automatically power up engaged. This is great for players who use a bypass looper to avoid

having to turn the pedal on manually each time they power on their pedalboard.

TAP LED – The Tap LED pulses at the rate of the LFO set by the Rate knob or the rate of a tapped in

tempo.

Building off of the lush, tonal landscapes that the Julia created,

Julianna is an all analog, digital LFO, stereo chorus/vibrato

with new expanded features. Julianna is able to produce mild

smooth chorus, to seasick vibrato and everywhere in between.

The familiar controls like Lag, Dry-Chorus-Vibrato Blend, and

selectable LFO wave shapes are all still here but Julianna

employs some new tricks. Secondary LFO speed, modulation

drift, tap/expression control and momentary features

will have you commanding all new kinds of sounds

not found in traditional chorus pedals.

CONTROLS

Produkt Specifikationer

Mærke:	Walrus Audio
Kategori:	Ikke kategoriseret
Model:	Julianna

Har du brug for hjælp?

Hvis du har brug for hjælp til Walrus Audio Julianna stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Walrus Audio Manualer

Walrus Audio Luminary Manual

16 August 2025

Walrus Audio Canvas Nano Manual

14 August 2025

Walrus Audio Canvas Rehearsal Manual

13 August 2025

Walrus Audio Canvas Clock Manual

12 August 2025

Walrus Audio Canvas Re-Amp Manual

12 August 2025

Walrus Audio Canvas Power HP Manual

12 August 2025

Walrus Audio Silt Manual

28 Juli 2025

Walrus Audio 385 MKII Manual

27 Juli 2025

Walrus Audio Qi Etherealizer Manual

16 Juli 2025

Walrus Audio Iron Horse Manual

18 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IFM SU9030 Manual

13 September 2025

IFM O2U554 Manual

13 September 2025

Speco Technologies HTi70TM Manual

13 September 2025

QSC RMXa Manual

13 September 2025

Tineco Floor One S2 Series Manual

13 September 2025

Tineco Floor One S3 Breeze Manual

13 September 2025

Tineco Floor One S5 Steam Manual

13 September 2025

Osram VX500-CB Manual

13 September 2025

Zelmer ZTS7990 Manual

13 September 2025

Osram VX250-SP Manual

13 September 2025