Wasp WWS800 Manual

Wasp Stregkodelæser WWS800

Læs gratis den danske manual til Wasp WWS800 (18 sider) i kategorien Stregkodelæser. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Wasp WWS800, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/18

Wasp Technologies WWS800 Cordless Scanner

User’s Manual

Document Number: W800-A1

Release Date: February 18, 2004

 2004, Wasp

Technologies

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Table of Contents

Introduction ........................................................................ 1

Installation .......................................................................... 2

2.1

Power Up the WWS800 Base Station ................................ 2

2.2

Power Up the WWS800 Cordless Scanner......................... 3

2.3

Setup RF Connection.......................................................... 3

2.4

Charging your WWS800 Cordless Scanner........................ 4

2.5

Interface Setting.................................................................. 5

General Features................................................................. 6

3.1

Buzzer................................................................................. 6

3.2

Indicator ............................................................................. 6

3.3

Scan Modes ........................................................................ 6

3.4

Auto-Sense ......................................................................... 7

3.5

Re-read Delay..................................................................... 7

3.6

Scanner Time-out Duration ................................................ 7

3.7

Reading Redundancy .......................................................... 8

3.8

Supported Symbologies ...................................................... 8

3.9

Negative Barcodes.............................................................. 8

Output Interface (WWS800 Base Unit).............................. 9

4.1

Keyboard Wedge Interface ................................................. 9

4.1.1

Keyboard Type ................................................................... 9

4.1.2

Keyboard Style - Alphabets................................................ 9

4.1.3

Keyboard Style – Digits ..................................................... 9

4.1.4

Capital Lock Status........................................................... 10

4.1.5

Alphabets Transmission.................................................... 10

4.1.6

Digits Transmission.......................................................... 10

4.1.7

Inter-Character Delay ....................................................... 10

4.2

USB Interface ................................................................... 10

4.3

Memory Parameters.......................................................... 11

4.3.1

Memory Mode .................................................................. 11

4.3.2

Clear Data......................................................................... 11

4.3.3

Send Data ......................................................................... 11

4.3.4

Memory Data Delay ......................................................... 11

Bluetooth Serial Port ........................................................ 12

5.1

Configuring the WWS800 ................................................ 12

5.1.1

Activate Bluetooth Serial Port Interface........................... 12

5.1.2

Authentication & PIN Code.............................................. 12

5.1.3

Device Name Broadcasting .............................................. 12

5.1.4

Update Settings................................................................. 13

5.1.5

Timeout ............................................................................ 13

5.2

Configuring Bluetooth Device Driver .............................. 13

Symbology Parameters ..................................................... 19

6.1

Code39 ............................................................................. 19

6.2

Italy / French Pharmacode ................................................ 19

6.3

Industrial / Interleave / Matrix 25..................................... 19

6.4

Codabar ............................................................................ 20

6.5

UPCE................................................................................ 20

6.6

EAN8................................................................................ 20

6.7

UPCA ............................................................................... 21

6.8

EAN13.............................................................................. 21

6.9

MSI................................................................................... 21

6.10

Plessey.............................................................................. 21

6.11

Telepen............................................................................. 22

6.12

RSS................................................................................... 22

Data Output Format.......................................................... 23

7.1

Character Substitution ...................................................... 23

7.2

Prefix / Postfix Code ........................................................ 23

7.3

Code ID ............................................................................ 23

7.4

Length Code ..................................................................... 24

Data Editing...................................................................... 25

8.1

Select Editing Format ....................................................... 25

8.2

Restore Default Format .................................................... 25

8.3

Applicable Conditions ...................................................... 25

8.4

Total Number of Fields .................................................... 26

8.5

Dividing Data into Fields ................................................. 26

8.6

Additional Fields .............................................................. 27

8.7

Field Transmission Sequence ........................................... 27

8.8

End of Format Programming ............................................ 27

8.9

Activate Data Editing Formats ......................................... 27

8.10

Exclusive Data Editing ..................................................... 27

8.11

Programming Examples.................................................... 27

Configuring your WWS800.............................................. 29

9.1

Enter Configuration Mode................................................ 29

9.2

Default.............................................................................. 29

9.3

List Setting ....................................................................... 29

9.4

Setting Parameter Values.................................................. 29

9.4.1

Numeric Parameters ......................................................... 30

9.4.2

Character String Parameters ............................................. 30

9.4.3

Key Type/Status Setting ................................................... 31

9.5

Exit Configuration Mode.................................................. 32

Produkt Specifikationer

Mærke:	Wasp
Kategori:	Stregkodelæser
Model:	WWS800

Har du brug for hjælp?

Hvis du har brug for hjælp til Wasp WWS800 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stregkodelæser Wasp Manualer

14 Juli 2025

5 September 2024

5 September 2024

5 September 2024

5 September 2024

5 September 2024

5 September 2024

5 September 2024

5 September 2024

5 September 2024

Stregkodelæser Manualer

Nyeste Stregkodelæser Manualer

Honeywell 8675i Manual

12 August 2025

Inateck BCST-46 Manual

7 August 2025

Inateck BCST-70 Manual

5 August 2025

Inateck BCST-43 Manual

5 August 2025

Inateck BCST-42 Manual

5 August 2025

Inateck BCST-50 Manual

5 August 2025

Inateck BCST-54 Manual

5 August 2025

Inateck BCST-33 Manual

5 August 2025

Inateck BCST-75 Manual

5 August 2025

Newland NLS-HR3260 Manual

2 August 2025