Worx Nitro WX501 Manual

Worx Sav Nitro WX501

Læs gratis den danske manual til Worx Nitro WX501 (12 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Worx Nitro WX501, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
SAFETY AND OPERATING MANUAL
ORIGINAL INSTRUCTIONS
WX501 WX501.X
20V Cordless Brushless
Compact Reciprocating Saw
2
WX501 WX501.X
20V Cordless Brushless
Compact Reciprocating Saw
TABLE OF CONTENTS
1. SAFETY INSTRUCTIONS
2. COMPONENT LIST
3. TECHNICAL DATA
4. OPERATING INSTRUCTIONS
5. MAINTENANCE
6. ENVIRONMENTAL PROTECTION
7. DECLARATION OF CONFORMITY
1. SAFETY INSTRUCTIONS
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and specications
provided with this power tool.
Failure to follow
all instructions listed below may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodied plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators.
There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or
medication.
A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.
Carrying power tools
with your nger on the switch or energising
power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of
dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles.
A careless action
can cause severe injury within a fraction of a
second.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application.
The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot
be controlled with the switch is dangerous and

Produkt Specifikationer

Mærke: Worx
Kategori: Sav
Model: Nitro WX501

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx Nitro WX501 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Worx Manualer

Worx

Worx Nitro WG325.9 Manual

3 Juli 2025
Worx

Worx Nitro WG325.1 Manual

30 Juni 2025
Worx

Worx Nitro WG350 Manual

30 Juni 2025
Worx

Worx Nitro WG350.9 Manual

30 Juni 2025
Worx

Worx WA0163 Manual

29 Juni 2025
Worx

Worx WX526L.9 Manual

29 Juni 2025
Worx

Worx WA0167 Manual

29 Juni 2025
Worx

Worx Nitro WG325 Manual

29 Juni 2025
Worx

Worx Nitro WX501 Manual

25 Februar 2025
Worx

Worx Nitro WX501.9 Manual

25 Februar 2025

Sav Manualer

Nyeste Sav Manualer

Baumr-AG

Baumr-AG SMX120 Manual

1 August 2025
Scheppach

Scheppach KS1200 Manual

1 August 2025
RYOBI

RYOBI CS-1835 Manual

31 Juli 2025
Guede

Guede KS 450-55 Manual

31 Juli 2025
RYOBI

RYOBI CS-4016 Manual

31 Juli 2025
RYOBI

RYOBI RRS1801M Manual

31 Juli 2025
Skil

Skil 3540 CA Manual

31 Juli 2025
RYOBI

RYOBI One+ RPLS18X Manual

31 Juli 2025
RYOBI

RYOBI One+ RMS18254X Manual

31 Juli 2025
RYOBI

RYOBI RTBS18X Manual

31 Juli 2025