Wyse - Dell CX0LE Manual

Wyse - Dell overvåge CX0LE

Læs gratis den danske manual til Wyse - Dell CX0LE (5 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 60 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 30.5 anmeldelser. Har du et spørgsmål om Wyse - Dell CX0LE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Mounting Bracket Installation

Instructions for Winterm™

Thin Clients, Model SX0

The SX0 products include the S10, S30, S50, and S90 thin clients that can easily be

mounted vertically on a wall, horizontally under most desks, or mounted on most VESA

standard monitors using the Model SX0 mounting bracket. The bracket can be mounted

with the power supply holder either in the up or down position when vertical or the left or

the right when horizontal, for a total of four available mounting positions. The thin client

can be inserted with either the power button positioned towards the top or to the right.

Cables can be attached at any convenient time, as long as the power is disconnected. The

mounting bracket must be mounted vertically or horizontally using four (4) user-provided

#10 screws into a sturdy support such as a wall brace or solid desk. For flat-screen

monitor mounting, four (4) M4x10 mm mounting screws are provided.

Note

If installing on a hollow wall, any standard anchoring method may be used,

such as screws, butterfly anchors, or expansion bolts.

Notes

For flat-screen monitor mounting:

The bracket may need to be mounted horizontally with the connectors facing

down and the power button up, on the right or left.

Check with your monitor’s manufacturer for proper screw size and length

before assembling. If the four (4) M4x10 mm screws provided are not correct

for your bracket-to-monitor mounting requirements, user is to provide the

proper replacement.

Wall and Under-Desk Mounting Configuration

Use these instructions to mount the thin client vertically on a wall or horizontally under

most desks.

1. Remove the four horizontal feet from the thin client by sliding the feet towards the back

panel.

2. Use the mounting bracket as a template to mark the positions of the mounting holes

(see Figure 1).

Note

Leave at least 12.5 mm between the ventilation holes of the thin client and

any solid surface. An enclosed area must have a minimum of 150 square cm

of venting or other open area to maintain proper ventilation of the thin client.

Note

When determining location, take into account the cable lengths of the

monitor, keyboard, mouse, power supply, and peripherals.

Figure 1 Mounting Hole Placement

3. Install the user-provided wall anchors. Any standard anchoring method may be used,

such as screws, butterfly anchors, or expansion bolts.

4. Mount the bracket with four (4) user-provided #10 screws and snug the screws to hold

the mounting bracket firmly in place (don’t overtighten)

5. Align the thin client spine (from the back panel end) with the mounting bracket rails;

slide the thin client into the bracket until it snaps twice into place (see Figures 2 and 3).

Note

For thin client cooling requirements, position the thin client so that the power

button to the thin client is on the top when installing in the vertical position

and to the right facing you when installing in the horizontal position under a

desk.

Produkt Specifikationer

Mærke:	Wyse - Dell
Kategori:	overvåge
Model:	CX0LE

Har du brug for hjælp?

Hvis du har brug for hjælp til Wyse - Dell CX0LE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

overvåge Wyse - Dell Manualer

Wyse - Dell VX0 Manual

24 August 2024

Wyse - Dell CX0LE Manual

24 August 2024

Wyse - Dell VX0LE Manual

24 August 2024

overvåge Manualer

Nyeste overvåge Manualer

BenQ DesignVue PD2730S Manual

8 April 2025

Asus VA279QGS Manual

8 April 2025

Acer EV227Q Manual

8 April 2025

BenQ PD3226G Manual

7 April 2025

Philips 221V8LB Manual

4 April 2025

Extron TLS 1025M Manual

2 April 2025

PureTools PT-SCREEN-100 Manual

1 April 2025

Viewsonic VG2752-2K Manual

30 Marts 2025

Satco S13165 Manual

30 Marts 2025

Satco S16434 Manual

30 Marts 2025