Yale Easy Fit Kit 4 Manual

Yale Alarmsystem Easy Fit Kit 4

Læs gratis den danske manual til Yale Easy Fit Kit 4 (16 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Yale Easy Fit Kit 4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Installation · Programming · Operating

Keep this manual safe for reference and future maintenance

Introduction Contents

Thank you for choosing this Yale EF Series Alarm System.

This simple to install system has been designed with the

user in mind.

All the components are self contained and no connections

are needed between the units. There is no need to

damage the home decor, lift carpets or run cables.

You can install up to 30 devices in this system. As well as

extra Door/Window Contacts, PIR Motion Detectors and

Smoke Detectors, you can add Key Fobs and Key Pads

for added control convenience.

There is no need to wire into the mains supply or seek

the services of a qualiﬁed electrician. All components are

and battery changes (when notiﬁed by the system) will

ensure reliability and peace of mind.

All components are ‘tamper’ protected. Any unauthorised

tampering with the system will result in an alarm. This

feature can be turned off by the user when a battery

change is required.

Display extreme caution when using ladders or steps,

please follow manufacturer instructions. Be careful when

using hand and power tools and follow the manufacturers’

guidelines when using them. Take care that the correct

tools are used. Wear goggles or protective clothing where

required.

The Siren is extremely loud, please ensure you replace the

cover and retreat to a safe distance before testing.

Special Notes on Compatibility:

This alarm system is NOT compatible with HSA6000

series and HSA3000 series accessories. Please note the

preﬁx “ ” on the front of the part number to indicate EF-

compatibility. (Note: Not compatible with accessories that

carry an ‘SR’ preﬁx).

Contents

1. Location planning 2

2. Unpacking the system 3

3. Programming the system 5

4. Mounting alarm devices

5. Using the system 8

6. Adding accessories

7. Changing the batteries 11

8. Troubleshooting 13

9. Speciﬁcations

Recommended Installation Sequence

We recommend you follow the easy start sequence,

headings numbered . 1-5

Information and illustrations are subject to change within this

document. Yale reserves the right to alter the speciﬁcation and

product design at anytime without notice. Yale® is a registered

smart

Living EF Series Alarms

(EF-KIT1 & EF-KIT4)

The 2 year guarantee for this Yale

EF Series Alarm Kit is active from

the date of purchase (A copy of this

guarantee is available on our website).

Please register online within

12 months of purchase at

www.yale.co.uk/registeryourproduct

Issue No. 1A

For more information on this product

and Yale Smart Living Range visit

www.yale.co.uk/smart-living

Consumer Support: info@yale.co.uk

Key Fob

Can be used outside the premises and

kept on your keyring.

Location planning

Operating range

All devices must be within 30 metres of the Siren unit and must

not be mounted on or near large metal objects. Avoid obvious

sources of electrical interference such as fridges and microwave

ovens.

Tamper switches

When mounting devices ensure that any tamper switches close

fully. On uneven surfaces it may be necessary to place packing

behind the switch for reliable operation.

Work out the best places to locate the devices for maximum protection. Having chosen the

locations do not mount at this stage.

Smoke Detector

• Mount in the middle of the ceiling at the top of

a stairwell, or on the centre of hallway ceilings

where smoke would most likely be detected.

• Do not mount in corners or above cooking

appliances and heaters.

• Install additional detectors if there are closed

doors preventing smoke from reaching

detectors.

External Siren (EF-KIT1 ONLY)

Choose a position on an external wall where the

Siren would be most prominent. Mount as high

as possible, out of easy reach.

Panic Button

The Panic Button provides extra protection

for you and your family. When help is

needed the button can activate your alarm

immediately - even when the system is

disarmed.

• Mount on ﬂat wall surface

• Designed for indoor use only

• Out of reach of children

• Hidden from view while easily accessible.

Extend the system

Extend the system in the future to increase your security or as your

needs change.

For example, add extra PIR Motion Detectors in bedrooms and extra

Door/Window Contacts (30 devices in total, including Key Pad).

Yale

aleY

Door/Window Contact

Use one Door/Window Contact on a door

that is used as the main point of entry and

exit, usually your front door. The other

Door/Window Contact can be used to

protect another entry point such as a rear

door.

• Mount as high as possible.

• Do not aim a PIR Motion Detector at this

door or window.

aleY

1 2 3

654

7 8 9

aleY

Indoor Siren

(EF-KIT4 ONLY)

Choose a position on

an internal wall where

the Siren would be most

prominent. Mount as

high as possible, out of

easy reach

PIR Motion Detector

• Mount in a position such that an intruder would normally

move across a PIRs ﬁeld of view.

• Height should be between 1.9 and 2 metres above ﬂoor level.

• Location in a corner will ensure wider room coverage.

• Do not mount a PIR where its ﬁeld of view will be obstructed

e.g. by curtains, ornaments etc.

• Do not point directly at sources of heat e.g. ﬁres or boilers,

and do not position directly above radiators.

• Avoid mounting a PIR directly facing a window.

• Do not point a PIR at a door protected by a Door/Window

Contact.

Key Pad Remote Control

• The Key Pad should be sited next to the main point of

entry/exit so that the system can be disarmed/armed

within 20 seconds of entering/leaving the premises.

• Ensure that the Key Pad is not visible from the outside

of the premises.

• Mount at chest height for ease of use.

• Designed for indoor use only.

Produkt Specifikationer

Mærke:	Yale
Kategori:	Alarmsystem
Model:	Easy Fit Kit 4

Har du brug for hjælp?

Hvis du har brug for hjælp til Yale Easy Fit Kit 4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Alarmsystem Yale Manualer

Yale Intruder Alarm Kit IA-230 Manual

19 August 2024

Yale SR-330 Manual

12 August 2024

Yale Smart Home Luxe SR-3200i Manual

10 August 2024

Yale SR-320 Manual

8 August 2024

Yale Easy Fit Kit 4 Manual

20 Juli 2024

Yale Intruder Alarm Kit IA-210 Manual

12 Juli 2023

Yale SR-310 Manual

24 November 2022

Yale EF-KIT2 Manual

21 Oktober 2022

Alarmsystem Manualer

Nyeste Alarmsystem Manualer

Elro SA68M Manual

31 Juli 2025

Hikvision DS-PM2-D Manual

28 Juli 2025

Hikvision DS-PDCO-E-WE Manual

27 Juli 2025

Hikvision DS-PDHT-E-WE Manual

27 Juli 2025

Hikvision DS-PDSMK-E-WE Manual

27 Juli 2025

Hager S791-22X Manual

23 Juli 2025

SimpliSafe KT043 Manual

22 Juli 2025

Hager LCA01U Manual

21 Juli 2025

Hager S165-22X Manual

21 Juli 2025

Hager S230-22X Manual

21 Juli 2025