Yale EF-KIT2 Manual

Yale Alarmsystem EF-KIT2

Læs gratis den danske manual til Yale EF-KIT2 (28 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Yale EF-KIT2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

Installation · Programming · Operating

Keep this manual safe for reference and future maintenance

Telecommunicating

Alarm (EF-KIT2)

Introduction Contents

Thank you for choosing the Yale Telecommunicating Alarm

System. This simple to install system has been designed

with the user in mind.

All the components are self contained and no connections

are needed between the units. There is no need to

damage the home decor, lift carpets or run cables.

You can install up to 30 devices in this system. As well

as extra Door/Window Contacts, PIR’s and Smoke

Detectors, you can add Key Fobs and Key Pads for added

control convenience.

There is no need to wire into the mains supply or seek

the services of a qualiﬁed electrician. The Control Panel is

are powered by battery (all batteries included).

Regular testing and battery changes (when notiﬁed by the

system) will ensure reliability and peace of mind.

All components are ‘tamper’ protected. Any unauthorised

tampering with these items will result in an alarm. This

feature can be turned off by the user when a battery

change is required.

Display extreme caution when using ladders or steps,

please follow manufacturer’s instructions.

Be careful when using hand and power tools and follow

the manufacturer’s guidelines when using them. Take care

that the correct tools are used. Wear goggles or protective

clothing where required.

The external Siren is extremely loud, please ensure you

replace the cover and retreat to a safe distance before

testing.

The dialling facilities must only be used with persons who

have consented to being contacted by the system.

The system is not to be used to make 999 emergency

calls directly. Yale do not hold responsibility for any actions

taken by emergency services for incorrect use of the

dialling facility.

Special Notes on Compatibility:

This alarm system is NOT compatible with HSA6000

series and HSA3000 series accessories. Please note the

preﬁx “ ” in the front of the part number to indicate EF-

compatibility (note: not compatible with accessories that

carry an “ ” preﬁx). SR-

Information and illustrations are subject to change within this

document. Yale reserves the right to alter the speciﬁcation and

product design at anytime without notice. Yale® is a registered

Contents

1. Location planning 2

2. Un-pack all the parts 4

3. First Time Easy Install 6

4. Mounting alarm devices 8

5. Control Panel Menu System in Detail 11

6. Using the System 17

7. Adding and using Accessories 20

8. Changing the batteries 22

9. Troubleshooting 24

10. Sensor response table 26

11. Speciﬁcations 27

Recommended Installation Sequence

We recommend you follow the simple install

sequence, headings numbered 1-6.

smart

Living

Issue No: 1A

The 2 year guarantee for this Yale

Telecommunicating Alarm Kit is active

from the date of purchase (A copy

of this guarantee is available on our

website). Please register online within 12

months of purchase at www.yale.co.uk/

registeryourproduct

For more information on this product and Yale Smart

Living Range visit www.yale.co.uk/smart-living

Consumer Support: info@yale.co.uk

aleY

1 2 3

654

7 8 9

aleY

Location planning

Home and Away Mode Planning

The Home Arming mode allows the premises to be

part armed so that no one can get inside without

warning the occupier, yet the person already inside

the house can move freely without triggering the

alarm. For example the downstairs of a house can

be armed while upstairs can be disarmed allowing

the user to go to bed without causing an alarm.

If this feature is to be used, then it should be

planned now, before installation.

Decide what areas can be occupied when in Home

Arming mode, the sensors for these areas should be

ignored using the “Home-Arm set” option (see page

11); and the sensors activated on the path to access

the Control Panel should be to be set to either Entry

or Away Entry as explained in Chapter 5.

Operating Range

All devices must be within 30 metres of the Control

Panel and must not be mounted on or near large

metal objects. Avoid obvious sources of electrical

interference such as fridges and microwave ovens.

Tamper Switches

When mounting devices ensure that any tamper

switches close fully. On uneven surfaces it may be

necessary to place packing behind the switch for

reliable operation.

Extend The System

Extend the system in the future to increase your

security or as your needs change.

For example, add extra PIR Motion Detectors and

extra Door/Window Contacts.

Choosing Location

To minimise interference, avoid locating devices

close to metal framework, glass, electrical

appliances (especially wireless devices) and electric

cables.

Please note that the present of high density material

(metal, glass etc) in the transmission path will

signiﬁcantly reduce the wireless transmission range.

1Work out the best places to locate the devices for maximum protection. Having chosen the

locations do not mount at this stage.

Key Pad

A second Key Pad is ideal for use in bedrooms

or at the top of a stairwell so the ground ﬂoor can

be armed when going to bed for the night, or at a

side or back door for alternative entry point.

• Mount at chest height for ease of use

• Designed for indoor use only

• Key Pad should be accessible from a protected

entry/exit point

• Ensure that the Key Pad is not visible from the

outside of the premises.

Panic Button

The Panic Button provides extra protection for

you and your family. When help is needed the

button can activate your alarm immediately - even

when the system is disarmed.

• Mount on ﬂat wall surface

• Designed for indoor use only

• Out of reach of children

• Hidden from view while easily accessible.

Produkt Specifikationer

Mærke:	Yale
Kategori:	Alarmsystem
Model:	EF-KIT2
Produktfarve:	Hvid
Kontroltype:	Berøring
Understøttelse af Smartphone-fjernbetjening:	Ja
Alarm decibel:	104 dB
Antal enheder der er tilsluttet samtidigt (maks.):	30
Antal bevægelsessensorer:	2 stk
Antal dør/vindue sensorer:	2 stk
Bevægelsessensor teknologi:	Passiv infrarød (PIR) sensor