Yale PIR Image Camera Manual

Yale Sikkerhed PIR Image Camera

Læs gratis den danske manual til Yale PIR Image Camera (2 sider) i kategorien Sikkerhed. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Yale PIR Image Camera, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Description:
1) Learn/Test Button with LED
Send test signal: hold and release within 3 secs.
This is used when checking accessory range
(See Smart Home Alarm user manual).
Send learn signal: hold for 10 secs+. Learn
button LED will flash when learn signal is sent.
2) Camera Flash
3) Camera
4) 2 x 1.5V AA Alkaline batteries
5) Cover tamper switch
Pack contents
• 1 x PIR Image Camera with batteries
• 4 x wall plugs & screws
Program your PIR before installation and test
afterwards. Please see your current Smart Home
Alarm user manual.
SPECIAL NOTE:
When inserting new batteries, the following are
disabled for 5 minutes.
• Tamper Switch
• Image will not be sent in the first 5 minutes
Please make sure you do not trigger the PIR
Video Camera for 5 minutes before testing the
system.
Compatible with Yale Smart Home Alarms
(SR-range) ONLY.
PIR Image Camera
(SR-PC)
smart
Living
3
2
1
4
5
Programming & Installation
For more information on this product
and Yale Smart Living Range visit
www.yale.co.uk/smart-living
Consumer Support: info@yale.co.uk
2
The 2 year guarantee for this
Yale Smart Home Alarm Kit is
active from the date of purchase
(A copy of this guarantee is
available on our website).
Sleep Timer
The PIR features an automatic “sleep time” of
approximately 1 minute for power conservation.
After transmitting a detected motion, the PIR will
not retransmit for 1 minute. Any further motion
detected within this one-minute sleep period will
extend the sleep time by another minute.
LED indicator
Off Normal operation
LED flash
(2 sec)
When motion is detected and the
LED flashes for 2 seconds, this
indicates one of the following:
• Low battery
• Tamper switch activated
• PIR in test mode
WARNING:
When you delete the PIR Video Camera from
the system, please ensure the PIR batteries are
removed to avoid unnecessary drain.
Environmental conditions:
-10oc to 40oc , relative humidity 85%
non-condensing. Indoor use only
Radio:
2.4GHz
Motion Detection Range:
110o
Specification
Operation
Note: Waste electrical products and batteries should not be disposed
of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Issue No. 1A
Information and illustrations are subject to change.
Yale reserves the right to alter the specification and
product design at any time without notice.

Produkt Specifikationer

Mærke: Yale
Kategori: Sikkerhed
Model: PIR Image Camera

Har du brug for hjælp?

Hvis du har brug for hjælp til Yale PIR Image Camera stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sikkerhed Yale Manualer

Yale

Yale SR Series - Smarthome Alarm Manual

24 August 2024
Yale

Yale PIR Image Camera Manual

24 August 2024
Yale

Yale SR330 Manual

24 August 2024

Sikkerhed Manualer

Nyeste Sikkerhed Manualer

Aritech

Aritech SHATTERPRO 3 Manual

15 Januar 2025
Axis

Axis Camera Station S9001 Mk II Desktop Terminal Manual

15 Januar 2025
Eminent

Eminent EM6511 Manual

15 Januar 2025
Ranex

Ranex RX2567-Z Manual

11 Januar 2025
NetworX

NetworX NX-595E IP Communication Module Manual

5 Oktober 2024
Provision-ISR

Provision-ISR NVR2-4100P Manual

23 September 2024
Gira

Gira 0342 Manual

23 September 2024
Unitron

Unitron Smart Alert Systeem Manual

23 September 2024
Netatmo

Netatmo Welcome Manual

21 September 2024
NetworX

NetworX NX-408 Manual

20 September 2024