Yale PIR Video Camera Manual

Yale Overvågningskamera PIR Video Camera

Læs gratis den danske manual til Yale PIR Video Camera (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Yale PIR Video Camera, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Description:

1) Learn/Test Button with LED

hold and release within 3 secs Send test signal:

This is used when checking accessory range

(See Smart Home Alarm user manual).

hold for 10 secs+. Learn Send learn signal:

button LED will ﬂash when learn signal is sent.

2) Camera Flash

3) Camera

4) 3 x AA Lithium batteries

5) Cover tamper switch

Pack contents

• 1 x PIR Video Camera with bracket

• 4 x wall plugs & screws

• 3 x AA Lithium batteries

Program your PIR before installation and test

afterwards. Please see your current Smart Home

Alarm user manual.

SPECIAL NOTE:

When inserting new batteries, the following are

disabled for 5 minutes.

• Tamper Switch

• Video will not be sent in the ﬁrst 5 minutes

Please make sure you do not trigger the PIR

Video Camera for 5 minutes before testing the

system.

Compatible with Yale Smart Home Alarms

(SR-range) ONLY.

PIR Video Camera

(SR-PVC)

smart

Living

Programming & Installation

For more information on this product

and Yale Smart Living Range visit

www.yale.co.uk/smart-living

Consumer Support: info@yale.co.uk

The 2 year guarantee for this

Yale Smart Home Alarm Kit is

active from the date of purchase

(A copy of this guarantee is

available on our website).

Sleep Timer

The PIR features an automatic “sleep time” of

approximately 1 minute for power conservation.

After transmitting a detected motion, the PIR will

not retransmit for 1 minute. Any further motion

detected within this one-minute sleep period will

extend the sleep time by another minute.

LED indicator

Off Normal operation

LED ﬂash

(2 sec)

When motion is detected and the

LED ﬂashes for 2 seconds, this

indicates one of the following:

• Low battery

• Tamper switch activated

• PIR in test mode

WARNING:

When you delete the PIR Video Camera from

the system, please ensure the PIR batteries are

removed to avoid unnecessary drain.

Environmental conditions:

-10oc to 40oc , relative humidity 85%

non-condensing. Indoor use only

Radio:

2.4GHz

Motion Detection Range:

110o

Note: Waste electrical products and batteries should not be disposed

of with household waste. Please recycle where facilities exist. Check

with your local authority or retailer for recycling advice.

Speciﬁcation

Operation

Issue No. 1A

Information and illustrations are subject to change.

Yale reserves the right to alter the speciﬁcation and

product design at any time without notice.

Produkt Specifikationer

Mærke:	Yale
Kategori:	Overvågningskamera
Model:	PIR Video Camera

Har du brug for hjælp?

Hvis du har brug for hjælp til Yale PIR Video Camera stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Yale Manualer

Yale PIR Video Camera Manual

15 August 2024

Yale SR340 Manual

15 August 2024

Yale SR310 Manual

14 August 2024

Yale SR320 Manual

8 August 2024

Yale SV-DAFX-W Manual

7 August 2024

Yale SV-DFFI-W Manual

27 Maj 2024

Yale Smart Home CCTV WiFi kit SV-4C-2DB4MX Manual

9 Januar 2024

Yale SV-DB4MX-B Manual

13 November 2023

Yale Smart Home CCTV Manual

27 April 2023

Yale Key Pad Manual

31 December 2022

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Elro CI5000 Manual

31 Juli 2025

Elro CZ40RIPS Manual

31 Juli 2025

FLIR ioi HD CB-5222 Manual

30 Juli 2025

Eufy Cam S3 Pro Manual

30 Juli 2025

Telycam Vision+ 4KN 30X Manual

30 Juli 2025

Marshall Electronics CV630-BI Manual

30 Juli 2025

Telycam Vision+ SE Manual

30 Juli 2025

FLIR Ariel CC-3405 Manual

29 Juli 2025

FLIR Ariel CM-3505 Manual

29 Juli 2025

Axis Q6355-LE Manual

29 Juli 2025