Yamaha AX-590 Manual

Yamaha Modtager AX-590

Læs gratis den danske manual til Yamaha AX-590 (15 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 97 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 49 anmeldelser. Har du et spørgsmål om Yamaha AX-590, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/15
Natural Sound Stereo Integrated Amplifier
100W + 100W (8 ) RMS Output Power, 0.015% THD, 20–20,000 Hz AX-590Ω< >
85W + 85W (8 ) RMS Output Power, 0.019% THD, 20–20,000 Hz AX-490Ω< >
High Dynamic Power, Low Impedance Drive Capability
Continuously Variable Loudness Control
CD DIRECT AMP Switch to Reproduce the Purest CD Sound
PURE DIRECT Switch to Reproduce the Purest Source Sound
SUBSONIC FILTER Switch to Cut Out Undesirable
Ultra-Low-Frequency Signals < >For AX-590 only
PRE OUT/MAIN IN Terminals Useful for Connecting An Equalizer,
Sound Processor, etc. < >For AX-590 only
Remote Control Capability
Thank you for selecting this YAMAHA stereo integrated amplifier.
CONTENTS
Safety Instructions ................... 2
Supplied Accessories .............. 3
Connections ............................. 4
Operations ............................... 7
Remote Control Transmitter ... 11
Notes about the Remote
Control Transmitter ................. 12
Troubleshooting ...................... 13
Specifications ......................... 14
AX-590/490
IMPORTANT!
Please record the serial number of this
unit in the space below.
Serial No.:
The serial number is located on the rear
of the unit.
Retain this Owner’s Manual in a safe
place for future reference.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
R I S K O F E L E C T R I C
S H O C K
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER-SERVICEABLE
PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
•Explanation of Graphical Symbols
CAUTION
OWNER’S MANUAL
1Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2Retain Instructions – The safety and operating instructions
should be retained for future reference.
3Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4Follow Instructions – All operating and other instructions
should be followed.
5Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A A unit and cart combination should
be moved with care. Quick stops,
excessive force, and uneven
surfaces may cause the unit and
cart combination to overturn.
7Wall or Ceiling Mounting – The unit should be mounted to
a wall or ceiling only as recommended by the
manufacturer.
8Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be situated
on a bed, sofa, rug, or similar surface, that may block the
ventilation openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow
of air through the ventilation openings.
9Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances that
produce heat.
10 Power Sources – The unit should be connected to a power
supply only of the type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.
15 Damage Requiring Service – The unit should be serviced
by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into the
unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing – The user should not attempt to service the unit
beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.
Caution: Read this before operating your unit
2
SAFETY INSTRUCTIONS
1To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2Install this unit in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electrical
shock, do not expose the unit to rain and water.
3Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4Never open the cabinet. If something drops into the set,
contact your dealer.
5Do not use force on switches, controls or connection
wires. When moving the unit, first disconnect the power
plug and the wires connected to other equipment.
Never pull the wires themselves.
6Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
7Always set the VOLUME control to “– ” before starting∞
the audio source play: increase the volume gradually to
an appropriate level after the play back has been
started.
8To prevent lightning damage, pull out the power cord
and remove the antenna cable during an electrical
storm.
9When not planning to use this unit for long periods
of time (ie., vacation, etc.), disconnect the AC power
plug from the wall outlet.
10 Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before concluding
that the unit is faulty.
11 AC outlets
Do not connect audio equipment to the AC outlets on
the rear panel if that equipment requires more power
than the outlets are rated to provide.

Produkt Specifikationer

Mærke: Yamaha
Kategori: Modtager
Model: AX-590

Har du brug for hjælp?

Hvis du har brug for hjælp til Yamaha AX-590 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Yamaha Manualer

Yamaha

Yamaha MusicCast RX-S602 Manual

10 August 2025
Yamaha

Yamaha TSR-700 Manual

9 August 2025
Yamaha

Yamaha R-N600 Manual

9 August 2025
Yamaha

Yamaha MusicCast RX-V585 Manual

9 August 2025
Yamaha

Yamaha Aventage RX-A4A Manual

9 April 2025
Yamaha

Yamaha Aventage RX-A8A Manual

9 April 2025
Yamaha

Yamaha MA2030a Manual

31 December 2025
Yamaha

Yamaha PA2030A Manual

31 December 2025
Yamaha

Yamaha PC2001N Manual

31 December 2025
Yamaha

Yamaha PC9501N Manual

31 December 2025

Modtager Manualer

Nyeste Modtager Manualer

Audiolab

Audiolab 8300MB Manual

13 August 2025
ESX

ESX Signum SE1500.1 Manual

13 August 2025
Pyle

Pyle PFOCUS16 Manual

12 August 2025
Musical Fidelity

Musical Fidelity B1xi Manual

12 August 2025
Artsound

Artsound MX60MKII Manual

12 August 2025
NAD

NAD CI 8-120 DSP V2 Manual

12 August 2025
NAD

NAD CI 8-150 DSP V2 Manual

12 August 2025
ESX

ESX Signum SX1000.1 Manual

12 August 2025
ESX

ESX Signum SX800.4 Manual

12 August 2025
ESX

ESX Signum SX800.2 Manual

12 August 2025