Yamaha HTR-5230RDS Manual

Yamaha Modtager HTR-5230RDS

Læs gratis den danske manual til Yamaha HTR-5230RDS (50 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Yamaha HTR-5230RDS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/50

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

HTR-5230RDS

Natural Sound AV Receiver

Ampli-tuner audio-vidéo

G B

CAUTION

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1. To assure the ﬁnest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2. Install this unit in a cool, dry, clean place — away

from windows, heat sources, sources of excessive

vibration, dust, moisture and cold. Avoid sources of

humming (transformers, motors). To prevent ﬁre or

electrical shock, do not expose the unit to rain or

water.

3. Never open the cabinet. If something drops into the

unit, contact your dealer.

4. Do not use force on switches, controls or connection

wires. When moving the unit, ﬁrst disconnect the

power cord and then the wires connected to other

component. Never pull the wires themselves.

5. The openings on the cover assure proper ventilation

of the unit. If these openings are obstructed, the

temperature inside the unit will rise rapidly.

Therefore, avoid placing objects against these

openings, and install the unit in a well-ventilated area

to prevent ﬁre and damage.

Be sure to allow a space of at least 20 cm behind,

20 cm on both sides and 30 cm above the top panel

of the unit to prevent ﬁre and damage.

6. The voltage used must be the same as that speciﬁed

on this unit. Using this unit with a higher voltage than

speciﬁed is dangerous and may result in ﬁre or other

accidents. YAMAHA will not be held responsible for

any damage resulting from the use of this unit with a

voltage other than that speciﬁed.

7. Digital signals generated by this unit may interfere

with other component such as tuners, receivers and

TVs. Move this unit farther away from such

component if interference is observed.

8. Always set VOLUME to the “ ” position beforem

starting the audio source play. Increase the volume

gradually to an appropriate level after playback has

been started.

9. Do not attempt to clean the unit with chemical

solvents; this might damage the ﬁnish. Use a clean,

dry cloth.

10. Be sure to read the “TROUBLESHOOTING” section

regarding common operating errors before

concluding that the unit is faulty.

11. When not planning to use this unit for a long period

of time (e.g., a vacation), disconnect the AC power

cord from the wall outlet.

12. To prevent lightning damage, disconnect the AC

power cord and disconnect the antenna cable when

there is an electrical storm.

13. Grounding or polarization — Precautions should be

taken so that the grounding or polarization of the unit

is not defeated.

14. AC outlet — Do not connect audio component to the

AC outlet on the rear panel if that component

requires more power than the outlet is rated to

provide.

This unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned oﬀ. This state is called the standby

mode. In this state, this unit is designed to consume a

very small quantity of power.

■For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut oﬀ and an

appropriate 3 pin plug ﬁtted. For details, refer to the

instructions described below.

Note

• The plug severed from the mains lead must be destroyed, as a

plug with bared ﬂexible cord is hazardous if engaged in a live

socket outlet.

■Special Instructions for U.K. Model

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug, proceed

as follows:

The wire which is coloured BLUE must be connected to

the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured BROWN

must be connected to the terminal which is marked with

the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

Produkt Specifikationer

Mærke:	Yamaha
Kategori:	Modtager
Model:	HTR-5230RDS

Har du brug for hjælp?

Hvis du har brug for hjælp til Yamaha HTR-5230RDS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Yamaha Manualer

Yamaha RX-V1085 Manual

16 August 2025

Yamaha MusicCast RX-A1080 Manual

16 August 2025

Yamaha MusicCast RX-A3080 Manual

16 August 2025

Yamaha XMV4140-D Manual

16 August 2025

Yamaha TSR-7850 Manual

16 August 2025

Yamaha RX-V871 Manual

16 August 2025

Yamaha MusicCast RX-A2070 Manual

15 August 2025

Yamaha TX6n Manual

15 August 2025

Yamaha XMV4280 Manual

15 August 2025

Yamaha RX-V2085 Manual

15 August 2025

Modtager Manualer

Nyeste Modtager Manualer

Perreaux Silhouette SXV2 Manual

12 September 2025

Sony STR-DE635 Manual

12 September 2025

Perreaux Silhouette SX25 Manual

12 September 2025

Perreaux Audiant 80i Manual

12 September 2025

Samsung HW-C500 Manual

12 September 2025

Lab Gruppen CPA1202 Manual

12 September 2025

Sony STR-DH510 Manual

12 September 2025

Hartke KM200 Manual

12 September 2025

Hartke GT100C Manual

11 September 2025

QSC PLD4.2 Manual

11 September 2025