Yamaha IF2112/AS Manual

Yamaha Højttaler IF2112/AS

Læs gratis den danske manual til Yamaha IF2112/AS (6 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Yamaha IF2112/AS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

IF2115/AS(W), IF2112/AS(W)

EnglishDeutschFrançaisEspañol日本語

SPEAKER SYSTEM

Installation Series

OWNER'S MANUAL

Thank you for choosing this Yamaha speaker system. In order to take maximum

advantage of the speaker's features and ensure optimum performance and longevity,

please read this manual carefully before using the speaker system. Keep the manual

in safe place for future reference.

BEDIENUNGSANLEITUNG

Vielen Dank für die Auswahl dieses Lautsprechersystems von Yamaha. Damit Sie die

Eigenschaften dieses Lautsprechers optimal nutzen können, und um maximale

Leistung und Lebensdauer sicherzustellen, lesen Sie bitte vor der Inbetriebnahme

diese Anleitung sorgfältig durch. Bitte bewahren Sie diese Anleitung zum späteren

Nachschlagen an einem sicheren Ort auf.

MODE D’EMPLOI

Nous vous remercions d'avoir acheté ces enceintes Yamaha. Pour obtenir les

performances optimales de vos enceintes et garantir une longévité maximale, lisez

attentivement ce mode d'emploi avant d'utiliser les enceintes. Conservez-le en lieu

sûr pour pouvoir vous y référer ultérieurement.

MANUAL DE INSTRUCCIONES

Gracias por escoger este sistema de altavoces Yamaha. A ﬁn de aprovechar al

máximo las características de los altavoces y obtener un rendimiento y durabilidad

óptimos, lea atentamente este manual antes de utilizar el sistema. Guarde este

manual en un lugar seguro para futuras consultas.

取扱説明書

このたびは、ヤマハ製品をお買い求めいただきまして、まことにありがとうございます。

スピーカーの優れた性能を十分に生かして、末永くご愛用いただくために、この取扱説明書をご使用の

前に必ずお読みください。

(6)-1

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or

others, or damage to the device or other property. These precautions include, but are not limited to, the

following:

• If you use a stand, make sure to observe the following

precautions in order to avoid toppling the device or causing

damage to the internal components.

- Check the stand’s specifications and make sure that it is sturdy

enough to support the weight of the speaker.

- Mount only one speaker on each speaker stand.

- Use the supplied screws if included.

- Tighten fastening screws securely.

- Use the speaker stands with their legs fully opened.

- Use the stand at a height of less than 140cm.

- Add weight such as sand bags around the stand legs to prevent

them from falling over.

- Remove the speakers from the stands before moving the stands

or adjusting their height.

- Limit the number of people around the placed stand.

• Always consult qualified Yamaha service personnel if the

device installation requires construction work, and make sure

to observe the following precautions.

- Choose mounting hardware and an installation location that can

support the weight of the device.

- Avoid locations that are exposed to constant vibration.

- Make sure to use the specified hardware.

- Inspect the device periodically.

• When transporting or moving the device, always use two or

more people. Attempting to lift the device by yourself may

damage your back, result in other injury, or cause damage to

the device itself.

• Before moving the device, remove all connected cables.

• Do not expose the device to excessive dust or vibrations, or

extreme cold or heat (such as in direct sunlight, near a heater,

or in a car during the day) to prevent the possibility of panel

disfiguration or damage to the internal components.

• Do not place the device in an unstable position where it might

accidentally fall over.

• Before connecting the device to other devices, turn off the

power for all devices. Before turning the power on or off for all

devices, set all volume levels to minimum.

• Use only speaker cables for connecting speakers to the

speaker jacks. Use of other types of cables may result in fire.

• When choosing a power amplifier to use with your speakers,

make sure that its power output matches the speakers’ power

capacity (refer to the Specifications on page 14).

Even if the amplifier’s power output is lower than the speakers’

power capacity, the speakers may be damaged when

clipping of a high input signal occurs. The following may

cause damage to speakers:

- Feedback caused when using a microphone.

- Continuous high sound pressure level produced by electronic

instruments.

- Continuous high-power output of distorted signals.

- Popping noises caused by turning on equipment, or by

connecting or disconnecting system components while the

amplifier is turned on.

• When turning on the AC power in your audio system, always

turn on the power amplifier LAST, to avoid speaker damage.

When turning the power off, the power amplifier should be

turned off FIRST for the same reason.

• Do not operate this device at high volume levels or at a level

that is uncomfortable, since it is capable of producing sound

levels that could cause permanent hearing loss. If you

experience any discomfort or ringing in the ears, or suspect

an hearing loss, you should consult an audiologist.

Yamaha cannot be held responsible for damage caused

by improper use or modifications to the device.

* Illustrations herein are for explanatory purposes only, and may

not match actual appearance during operation.

* Company names and product names herein are trademarks or

registered trademarks of their respective companies.

For details on signal processor settings when driving speakers

with the use of multiple power amplifiers, please refer to the web

site below.

Yamaha Pro Audio global web site

http://www.yamahaproaudio.com/

Location

Connections

Handling caution

Produkt Specifikationer

Mærke:	Yamaha
Kategori:	Højttaler
Model:	IF2112/AS
Bredde:	378 mm
Dybde:	333 mm
Højde:	695 mm
Vægt:	29000 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Bluetooth:	Ingen
Udgangseffekt (RMS):	600 W
Anbefalet brug:	Universel
Frekvensområde:	50 - 20000 Hz
Lydtryksniveau (maks.):	130 dB
Impedens:	8 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Højttaler, type:	2-vejs
Lyd-output kanaler:	- kanaler
Højttaler, placering:	Ceiling-mountable, Stand-mountable, Wall-mountable
Antal drivere:	1
Diskanthøjttaler:	Ja
Antal drivere til diskant:	1
Peak Music-Udgangseffekt (PMPO):	2400 W
Sensitivitet:	94 dB
Diskant diameter:	36 mm
Bashøjttaler:	Ja
Antal bashøjttalerdrev:	1
Woofer diameter:	300 mm
Forstærker:	Ingen
Mid-range driver diameter:	76 mm
Woofer diameter (britisk mål):	12 "
Mid-range driver diameter (britisk mål):	3 "