ZKTeco ZKP8008 Manual

ZKTeco Printer ZKP8008

Læs gratis den danske manual til ZKTeco ZKP8008 (40 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om ZKTeco ZKP8008, eller vil du spørge andre brugere om produktet?

Side 1/40
POS rinter-80- PSeries
Programmer Manual
HT
[Name] Horizontal tab
[Format] ASCII HT
Hex 09
Decimal 9
[Description] Moves the print position to the next horizontal tab position.
[Details] This command is ignored unless the next horizontal tab position has been set.
If the next horizontal tab position exceeds the printing area, the printer sets the
printing position to [Printing area width + 1].
Horizontal tab positions are set with ESC D.
If this command is received when the printing position is at [printing area
width+ 1], the printer executes print buffer-full printing of the current line and
horizontal tab processing from the beginning of the next line.
The default setting of the horizontal tab position for the paper roll is font A(12
×24) every 8th character (9th, 17th, 25th, ... column).
[Reference] ESC D
LF
[Name] Print and line feed
[Format] ASCII LF
Hex 0A
Decimal 10
[Description] Prints the data in the print buffer and feeds one line based on the current line
spacing.
[Note] This command sets the print position to the beginning of the line.
[Reference] ESC 2, ESC 3
CR
[Name] Print and carriage return
2


Produkt Specifikationer

Mærke: ZKTeco
Kategori: Printer
Model: ZKP8008

Har du brug for hjælp?

Hvis du har brug for hjælp til ZKTeco ZKP8008 stil et spørgsmål nedenfor, og andre brugere vil svare dig