Acura Roof Box P/N 08L20-TA1-200 Manual

Acura Tagboks Roof Box P/N 08L20-TA1-200

Læs gratis den danske manual til Acura Roof Box P/N 08L20-TA1-200 (4 sider) i kategorien Tagboks. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Acura Roof Box P/N 08L20-TA1-200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PARTS LIST

Roof box

4 Brackets A

4 Brackets B

4 Plates

8 Knobs

8 Bolts

8 Washers

2 Straps

Seal

2 Keys

4 Large pads

4 Small pads

SUPPLIES REQUIRED

Isopropyl alcohol

Shop towel

INSTALLATION

NOTE:

• Be careful not to damage the roof and other

finished surfaces of the body when installing the

roof box.

• An Acura roof rack, sold separately, is required to

install the roof box.

• The maximum load capacity for roof racks vary

from model to model. Check the vehicle owner's

manual, the roof rack installation instructions, or

the load label on the rack for the roof rack load

capacity.

• The maximum load capacity for the roof box is

110 lb (50 kg); approximate roof box weight is

29 lb (13 kg).

• Do not allow the combined weight of the roof box

and cargo to exceed the carrying capacity of the

roof rack.

1. With the help of an assistant, carefully place the

box on the crossbars. Open the tailgate to make

sure that the box is not interfering with the

tailgate.

2802030M

ROOF BOX

Check that the box

is not interfering

with the tailgate.

TAILGATE

CROSSBARS

Put this information in the glove box with the vehicle owner's manual.

Accessory Application Publications No.

Issue Date

NOV 2010

2011 TSX

SPORT WAGON

ROOF BOX

P/N 08L20-TA1-200

INSTALLATION

INSTRUCTIONS

BII 45149

115149

4. Using isopropyl alcohol on a shop towel, clean

four brackets B where the small pads will attach.

Remove the adhesive backings from the small

pads, and attach them to the brackets B.

5. Using isopropyl alcohol on a shop towel, clean the

four plates where the large pads will attach.

Remove the adhesive backings from the large

pads, and attach them to the plates.

SMALL PAD

ATTACHING

SURFACE

SMALL PAD ADHESIVE

BACKING

BRACKET B

LARGE

PAD ADHESIVE

BACKING

PLATE

LARGE

PAD-ATTACHING

SURFACE

2. Open the roof box, and align the holes in the plate

with the mounting location at the forward crossbar.

The plate is located at the front of the base of the

roof box.

3. Attach an adhesive seal over each of the four

unused mounting holes (two on each side) at the

rear of the base of the box. The seals will help

prevent water from entering the roof box. Then,

remove the roof box from the crossbars.

2711040M

฀

ROOF BOX

ADHESIVE

SEAL

PLATE

(Align the holes in the

plate with the mounting

location by sliding the

plate as required.)

Flat side

faces

forward.

Produkt Specifikationer

Mærke:	Acura
Kategori:	Tagboks
Model:	Roof Box P/N 08L20-TA1-200

Har du brug for hjælp?

Hvis du har brug for hjælp til Acura Roof Box P/N 08L20-TA1-200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tagboks Acura Manualer

Acura Roof Box P/N 08L20-TA1-200 Manual

1 Juni 2024

Tagboks Manualer

Nyeste Tagboks Manualer

Thule Pacific L Manual

6 December 2024

Thule Vector L Manual

6 December 2024

Thule Pacific 780 DS Manual

7 Oktober 2024

Thule Sonic M Manual

19 September 2024

Thule Atlantis 1600 686 Manual

19 September 2024

Thule Atlantis 1800 687 Manual

17 September 2024

Thule Ocean 80 Manual

15 September 2024

Thule Touring Alpine Manual

7 September 2024

Cruz Easy 320N Manual

5 September 2024

Cruz Box 340N Manual

5 September 2024