Adastra IWA415B Manual

Adastra Modtager IWA415B

Læs gratis den danske manual til Adastra IWA415B (4 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Adastra IWA415B, eller vil du spørge andre brugere om produktet?

Side 1/4
IWA-series
In-wall Amplifier with Bluetooth
IWA2 B 953.081 15 UK
IWA230B 953.083UK
IWA B 953.085 415 UK
User Manual
Version 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
IWA-series In-Wall Amplifiers User Manual
Introduction
Thank you for choosing Adastra IWA-series in-wall amplifier for your discreet audio an
installation. This unit is designed to power wall or ceiling mounted speakers and receive
audio via Bluetooth, optical or aux input. Please read this manual to gain the best results
from your product and avoid damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture. If
liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.
No user serviceable parts inside Do not open the case refer all servicing to qualified service – –
personnel.
Safety
Check for correct mains voltage before connecting power to the amplifier.
Use the fig.8 power lead provided or a suitable equivalent.
Placement
The amplifier n be installed in a ceiling or stud wall to power flush or surface mount speakers. ca
The amplifier can also be surface mounted if necessary.
Ensure adequate ventilation for cooling and keep away from combustible material or moisture.
Ensure that the amplifier is within Bluetooth connection range of the sending device.
Cleaning
Use a soft cloth with a neutral detergent to clean the housing as required.
Use a vacuum cleaner to clear apertures and controls of any dust or debris bu - . ild up
Do not use solvents for cleaning the unit.


Produkt Specifikationer

Mærke: Adastra
Kategori: Modtager
Model: IWA415B

Har du brug for hjælp?

Hvis du har brug for hjælp til Adastra IWA415B stil et spørgsmål nedenfor, og andre brugere vil svare dig