ADDAC System ADDAC607 Manual

ADDAC System Ikke kategoriseret ADDAC607

Læs gratis den danske manual til ADDAC System ADDAC607 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om ADDAC System ADDAC607, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
March.2025
USER’S GUIDE . REV01
ADDAC607
CROSSOVER
INTRODUCING
From Portugal with Love!
Instruments for Sonic Expression
Est.2009
ADDAC607
March.2025
Here’s a graphical plot of the crossover slopes
Revision.01
Welcome to:
page 2ADDAC SYSTEM
WELCOME
Commonly audio Crossovers split an audio signal into several frequency ranges
so that each resulting signal is adequate for the speaker drivers they are
connected to, usually low range is sent to the big woofers, mid range to
smaller woofers and high range to the tweeters.
Here we introduce our ADDAC607,a mono 3 band Crossover featuring 4 pole,
24db Sallen-Key active filters and volume controls for each band.
Although ADDAC607 operates in Mono (for Stereo signals two modules can be
used) there are 2 audio inputs that allow an easy way for Stereo to Mono
summing. The [MONO SUM OUT] carries this summed signal. This output is
pre-gain and can also be use as a buffered Thru output.
The possibility to split the signal into different bands makes possible several
usefull processes, as examples:
- Independently process specific frequency ranges like adding delay only on
the high range band
- Split a signal to feed 3 compressors for multiple band compression
- By controlling the [GAIN] knobs they can act as “kill” switches in DJ mixers to
remove a whole band from the mix
This module is also a great companion for our ADDAC220 Dual Envelope
Follower+ allowing to extract the dynamics from any signal in a focused
frequency range allowing to, as an example, separate a kick drum from a
snare.
There are three switches to select the bands operating ranges:
2KHz, 4KHz and 8KHz for the high range
370Hz, 620Hz and 1KHz for the low range
The three [GAIN] controls set the volume for each band.
At noon they are unity gain, fully CW they are p2-x2 amplifiers.
The three last jacks carries the bands outputs.
Tech Specs:
6HP
4.5cm deep
60mA +12V
60mA -12V
0.0
1.0
0.8
0.6
GAIN
LOWS MIDS HIGHS
FREQUENCY
100Hz20Hz 1KHz 2KHz 4KHz 8KHz370Hz 620Hz 10KHz 20KHz
0.4
0.2

Produkt Specifikationer

Mærke: ADDAC System
Kategori: Ikke kategoriseret
Model: ADDAC607

Har du brug for hjælp?

Hvis du har brug for hjælp til ADDAC System ADDAC607 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret ADDAC System Manualer

ADDAC System

ADDAC System ADDAC320 Manual

31 Juli 2025
ADDAC System

ADDAC System ADDAC300 Manual

30 Juli 2025
ADDAC System

ADDAC System ADDAC607 Manual

30 Juli 2025
ADDAC System

ADDAC System ADDAC511 Manual

31 Maj 2025
ADDAC System

ADDAC System ADDAC814 Manual

30 Januar 2025
ADDAC System

ADDAC System ADDAC310 Manual

11 Oktober 2024
ADDAC System

ADDAC System ADDAC200RM Manual

11 Oktober 2024
ADDAC System

ADDAC System ADDAC507 Manual

3 September 2024
ADDAC System

ADDAC System ADDAC506 Manual

2 September 2024
ADDAC System

ADDAC System ADDAC200CT Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MiVue 540 Manual

2 August 2025
Pro User

Pro User PSI2000TX Manual

2 August 2025
Guede

Guede 5T Manual

2 August 2025
Navman

Navman EZY40 Manual

2 August 2025
Thule

Thule Chariot Ski kit Manual

2 August 2025
Hozelock

Hozelock 5102 Manual

2 August 2025
ART

ART 310 Manual

2 August 2025
Gorenje

Gorenje KAS53ZDCINVFT Manual

2 August 2025
Gorenje

Gorenje KAS35ZDCINVFT Manual

2 August 2025
Navman

Navman MY450LMT Manual

2 August 2025