ADDAC System Dual S&H+ ADDAC215 Manual

ADDAC System Ikke kategoriseret Dual S&H+ ADDAC215

Læs gratis den danske manual til ADDAC System Dual S&H+ ADDAC215 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om ADDAC System Dual S&H+ ADDAC215, eller vil du spørge andre brugere om produktet?

Side 1/7
ADDAC215 DUAL S&H+ USER’S GUIDE
October.2019Revision.02
Welcome to:
page 2ADDAC SYSTEM
OVERALL FEATURES
This module should not be judged by it’s size, at 6hp it’s packed with features.
At it’s core it features a noise source and two precision Sample & Holds with 0.01% of maximum devia-
tion from the Input which allows for quantized signals to be sent through without any noticeable detun-
ing or the typical over time voltage drop.
The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input
while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it’s own slew processor with a single control over attack/decay and an
ON/OFF switch.
The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input
the sample and hold function will act upon the incoming noise signal generating random CV values.
The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will
alternate between triggering the A and B section.
Besides each section output there’s also 4 extra outputs: Noise, Difference, Average and Sum. The [Noise]
output is coming from the noise source, the [Difference] output is the subtraction of section A minus
section B, the [Average] output is the sum of both A plus B and then divided by 2 and finally the [Sum]
output is the sum of both A plus B sections.


Produkt Specifikationer

Mærke: ADDAC System
Kategori: Ikke kategoriseret
Model: Dual S&H+ ADDAC215

Har du brug for hjælp?

Hvis du har brug for hjælp til ADDAC System Dual S&H+ ADDAC215 stil et spørgsmål nedenfor, og andre brugere vil svare dig