AFX PIXCOLOR Manual

AFX Lys PIXCOLOR

Læs gratis den danske manual til AFX PIXCOLOR (23 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om AFX PIXCOLOR, eller vil du spørge andre brugere om produktet?

Side 1/23
2-IN-1
PIXEL-MAPPING
MATRIX BAR
BLINDER BAR 2-EN-1 AVEC ECLAIRAGE DE FOND EN
COULEUR ET CONTROLE DMX / ARTNET2-IN-1 PIXEL
MAPPING MATRIXLICHTLEISTE2-IN-1 BLINDER BAR MET
VERLICHTE ACHTERGROND & DMX, ARTNET BESTURING
USER MANUAL
MANUEL D'UTILISATION
BEDIENUNGSANLEITUNG
HANDLEIDING
LOTRONIC SA
Avenue Zénobe Gramme 9
1480 Saintes
Belgium
Ref.: PIXCOLOR (16-2709)
©Copyright LOTRONIC 2018 PIXCOLOR
Page 2
Contents of the carton:
1 x LED pixel-mapping Matrix bar
1x Signal cable
1x Mains lead
1x User Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are
present and have been received in good condition. Notify the freight company immediately and retain packing
material for inspection if any parts appear to be damaged from shipping or the carton itself shows signs of
mishandling. Keep the carton and all packing materials. In the event that a fixture must be returned to the factory, it
is important that the fixture be returned in the original factory box and packing.
Safety Instructions
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is
not higher than that stated on the rating label or rear panel of the fixture.
• This product is intended for indoor use only!
It is essential that the device is earthed. A qualified person must carry out the electric connection.
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
The unit must be installed in a location with adequate ventilation, at least 1m from adjacent surfaces. Be sure that
no ventilation slots are blocked.
Let the device cool down for 10 minutes prior to servicing it.
• Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse size
and type.
• Secure fixture to fastening device using a safety chain. Never carry the fixture solely by its head. Use its carrying
handles.
• Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than this.
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. Always use the same type of spare parts.
Don’t connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
GB


Produkt Specifikationer

Mærke: AFX
Kategori: Lys
Model: PIXCOLOR

Har du brug for hjælp?

Hvis du har brug for hjælp til AFX PIXCOLOR stil et spørgsmål nedenfor, og andre brugere vil svare dig