Akasa Apache A-ATX08-A1B Manual

Akasa Computertaske Apache A-ATX08-A1B

Læs gratis den danske manual til Akasa Apache A-ATX08-A1B (1 sider) i kategorien Computertaske. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Akasa Apache A-ATX08-A1B, eller vil du spørge andre brugere om produktet?

Side 1/1
GB
CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD-controlled workstation is not
available, wear an antistatic wrist strap or touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges can cause injury if not handled
with care.
PT
Descargas Eletroestáticas (ESD) podem danificar componentes do PC. Caso não tenha uma bancada
específica disponível, utilize uma pulseira anti-estática ou toque uma superfície aterrada antes de manusear
qualquer componente.
ATENÇÃO
Por favor tenha cuidado ao desembrulhar e montar este produto, as extremidades de metal podem
machucar, caso o mesmo não seja manuseado com cuidado.
User manual
Product Code: A-ATX08
Contents
Top Panel
Internal cable connectors
GB
Connect the case internal cable connectors to the corresponding motherboard
headers.
NOTE : If the connectors are not apparent on the board consult your motherboard
manual. Connecting the panel to the wrong headers may result in motherboard
damage.
PT
Conecte os cabos internos do gabinete, nas entradas correspondentes da
placa-mãe.
NOTA : No caso das entradas não estarem marcadas na placa-mãe, consulte o
manual da mesma. Conectar os cabos numa entrada errada, pode danificar a
placa-mãe.
Installation
2019/10/V1
GB
Remove the front panel by gently pulling the bottom
first, then the top.
PT
Remova o painel frontal puxando a parte de baixo
primeiro, em seguida a parte de cima.
GB
Remove both side panels by undoing the thumbscrews
and pulling the panels towards the rear.
PT
Remova as laterais soltado os parafusos
(pode ser com as mãos) e puxando as laterais para trás.
GB
Place the motherboard in the correct position, align the
holes and secure it by using motherboard screws.
PT
Coloque a placa-mãe na posição correta,
alinhando-a com os furos e fixe-a com os parafusos.
Front panel removal
Side panels removal
Motherboard
1
2
GB
Fasten the fan or radiator to the top, front, or rear of the case.
PT
Fixe os ventiladores ou o radiador do water cooler na parte superior, frontal
ou traseira do gabinete.
Cooling system support
HDD
GB
Remove the corresponding PCI backplate for the add on card,
install and secure with the PCI backplate screw.
PT
Remova o backplate PCI com o slot correspondente que será
utilizado na placa-mãe para instalação da placa. Instale a placa e
fixe-a com os parafusos para PSU / PCI.
Graphics cards
GB
Insert the PSU into its position and secure with PSU
screws.
PT
Encaixe a fonte de alimentação na posição correta e
fixe-a com os parafusos.
PSU
GB
Remove the corresponding PCI backplate before
installing the graphics card, secure with the PCI back-
plate screw.
PT
Remova o backplate PCI do slot correspondente que
será utilizado na placa-mãe para instalação, encaixe a
placa de vídeo e fixe com o parafuso.
PCIe / PCI / AGP cards
GB
HDD mounting hole
Place the HDD/SSD in the correct position, align the holes and secure it by
using the HDD screws.
HDD tray
Slide the tray out from the HDD cage. Secure the 2.5” HDD/SSD on to the tray
with the HDD screws or the 3.5" HDD with the screw-less mounting clip. Slide
the tray back into the HDD cage.
PT
Furo de fixação do HDD
Coloque o HDD/SSD na posição correta, alinhe a furação e fixe-o utilizando os
parafusos para HD.
Bandeja do HD
Deslize a bandeja para fora do compartimento do disco rígido, prenda o
HDD/SSD de 2,5" na bandeja com os parafusos ou use o clipe de montagem
sem parafusos para HDD de 3,5 ". Deslize a bandeja de volta ao
compartimento.
Fan
Mini ITX
Micro ATX
POWER LED+
POWER LED-
Power LED
connectors
H.D.D LED
HDD
activity LED
HD AUDIO
POWER SW
2-pin Power
Switch
connector
USB 2.0
connector
HD Audio
connector
USB 3.0
internal cable
SATA power
connector
x 5
x 2 x 12 x 12
x 8 x 3 x 8
x 8
GB
❶ ❷ ❸Cable ties Motherboard screws Motherboard standoffs
❹ ❺ ❻ 3.5” HDD screws HDD tray screws 2.5" SSD rubber pad screws
❼ ❽2.5" SSD rubber pads PSU / PCI backplate screws
PT
❶ ❷ ❸Abraçadeiras parafusos para plca-mãe Espaçadores para placa-mãe
❹ ❺parafusos para HDD 3.5” parafusos da bandeja HDD
❻Parafusos de almofada de borracha SSD de 2,5 "
❼ ❽Almofadas de borracha SSD de 2,5 " Parafusos para PSU / PCI
Hard Drive LED
Power LED
Power switch
USB 3.0 port
Audio IN / OUT
USB 2.0 port
LED
Gaming Micro ATX Case
APACHE FLARE
up to 300mm
radiator
Right sideLeft side
2.5” HDD/SSD x 4 3.5” SSD/HDD x 1 + 2.5” SSD/HDD x 3
2.5”
HDD/SSD
2.5”
HDD/SSD x2
2.5” or 3.5”
HDD/SSD
2
1
1
3.5” HDD/SSD 2.5” HDD/SSD


Produkt Specifikationer

Mærke: Akasa
Kategori: Computertaske
Model: Apache A-ATX08-A1B

Har du brug for hjælp?

Hvis du har brug for hjælp til Akasa Apache A-ATX08-A1B stil et spørgsmål nedenfor, og andre brugere vil svare dig




Computertaske Akasa Manualer

Computertaske Manualer

Nyeste Computertaske Manualer

Silverstone

Silverstone FARA 311 Manual

16 December 2025
Silverstone

Silverstone SETA H1 Manual

16 December 2025
Silverstone

Silverstone ALTA F1 Manual

16 December 2025
Silverstone

Silverstone SETA H2M Manual

16 December 2025
AeroCool

AeroCool P500D Manual

10 December 2025
AeroCool

AeroCool P300D Manual

10 December 2025
Jonsbo

Jonsbo MOD-2 Manual

7 December 2025
Jonsbo

Jonsbo UMX4-PLUS Manual

6 December 2025