1. IMPORTANT - Read before starting
Safety instructions
Before starting, read the Important Safety Instructions supplied with the equipment. For your own safety and that of the
operator, technical crew and performers, follow all instructions and heed all warnings printed on the sheet and on the
equipment panels.
System operating firmware
The function of this product is determined by the firmware (operating software) that runs it. Firmware is updated regularly
as new features are added and improvements made.
Check www.allen-heath.com for the latest version of firmware.
Software licence agreement
By using this Allen & Heath product and the software within it you agree to be bound by the terms of the relevant End User
Licence Agreement (EULA), a copy of which can be found at www.allen-heath.com/legal. You agree to be bound by the
terms of the EULA by installing, copying, or using the software.
General precautions
• Protect the equipment from damage through liquid or dust contamination.
• If the equipment has been stored in sub-zero temperatures allow time for it to reach normal operating
temperature before use at the venue.
• Avoid using the equipment in extreme heat and direct sunlight. Make sure the ventilation slots are not
obstructed and that there is adequate air movement around the equipment.
• Clean the equipment with a soft brush and dry lint-free cloth. Do not use chemicals, abrasives or
solvents.
• It is recommended that servicing is carried out only by an authorised Allen & Heath agent. Contact
details for your local distributor can be found on the Allen & Heath website. Allen & Heath do not
accept liability for damage caused by maintenance, repair or modification by unauthorised personnel.
Powering on and off
It is important to always power the mixer on first, before powering on any connected equipment such as amplifiers or
powered speakers.
When shutting down, turn off amplifiers or speakers, ensure you have stopped any recording and finished any transferring
of data, then shutdown the mixer from the Home screen before turning the mixer off last.
Register your product
Register your product online via www.allen-heath.com/register.
Further information and support
Please refer to the Allen & Heath website for further information, knowledgebase and technical support.
Check for the latest version of this Getting Started Guide.
2. Packed items
Check you have received the following items:
• Qu Digital Audio Mixer
• IEC mains lead
• Safety booklet
