Allen & Heath ZEDi-10FX Manual

Allen & Heath Blander ZEDi-10FX

Læs gratis den danske manual til Allen & Heath ZEDi-10FX (12 sider) i kategorien Blander. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Allen & Heath ZEDi-10FX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ZEDi 10 / ZEDi 10FX - -

10 Channel Live + Recording Mixer User Guide

Thank you for purchasing this Allen & Heath ZEDi 10 or ZEDi 10FX!- -

We recommend that you read all of this user guide to get the best from your mixer and after

reading, please keep this safe for future reference.

Included in this package is:

 ZEDi 10 / ZEDi 10FX Mixer.- -

 IEC C5 Mains Power Cable. Please check correct mains plug is fitted for your country.

 USB A B Cable 2M.-

 This User Guide!

1. Get to know your mixer

1.1 MONO INPUT CHANNELS (M)

1. Mic Input Socket uses a standard 3 Pin XLR socket for connecting -

dynamic or condenser microphones.

2. Line / Inst Input Socket uses a standard 1/4” (6.25mm) Jack socket

for connecting balanced or unbalanced signals such as guitars and

other instruments.

3. Gain Control adjusts the gain of the input preamplifier to drive the

source signal level. Gain ranges from 5dB to 60dB.

4. Instrument Line / Inst input activates the circuit for electro-

acoustic and electric guitars, basses and other Direct Input

instruments. When activated the Mic Input Socket is disabled.

5. For channels M3 M4 and this is replaced by a LINE/PAD switch. This

activates the LINE input and a PAD Mic Input circuit which reduces the

Socket gain level by 20dB for very loud sources.-

6. lo-cut (Hi Pass Filter) is used for reducing Low Frequency noise such -

as handling noise, popping, rumble and proximity effect in microphone

signals.

7. HF EQ (High Frequency) equaliser affects treble frequencies in

the signal for adding “brightness” and “definition” or for reducing “hiss”

and “harshness”.

8. MF EQ (Mid Frequenc y) equaliser aff ects frequencies in the signal

for adding “presence” or for removing “boxiness”.

9. LF EQ (Low Frequency) equaliser affects bass frequenc ies in the

signal to cover “boom” and “sub bass” frequencies.-

10. AUX send controls the amount of si gnal sent from the channel to

the aux buss and AUX OUT MIX. The signal is sourced pre fader (-) so

is independent of the level being sent to the main L R Mix. -

There is a master level control for the .AUX OUT

11. FX send controls the amount of signal sent from the channel to

the FX buss and the . The signal is post fader ( ) which FX OUT -MIX

means it’s affected by the channel control so it stays in proportion MIX

to the signal going to the .MAIN MIX

There is no master level control for the .FX OUT

12. PAN adjusts signal from a mono input channel between the left

and right busses and subsequently the main outputs.

13. MIX rotary fader controls the amount of signal to the left and right

busses.

14. -Pre Fade Listen (PFL) switches the channel input signal to the

headphones for checking before adding it to Mix. The PFL signal is

taken after the but before the control. The EQ MIX LR Meters display

the channel input level when the PFL switch is activated.

Produkt Specifikationer

Mærke:	Allen & Heath
Kategori:	Blander
Model:	ZEDi-10FX
Tænd-/slukkontakt:	Ja
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	332.9 mm
Dybde:	274.6 mm
Højde:	96.5 mm
Vægt:	2300 g
Produktfarve:	Sort
USB-port:	Ja
Antal USB 2.0-porte:	1
Strømforbrug (typisk):	12 W
AC-adapter inkluderet:	Ja
AUX-indgang:	Ja
Mikrofonindgang:	Ja
Medfølgende software:	Cubase LE Software, \nCubasis LE App
Videofunktion:	Ingen
Tilslutning af hovedtelefoner:	6,3 mm
Udgang til hovedtelefoner:	Ja
Antal kanaler:	10 kanaler
XLR udgående:	2
Fantomstrøm:	48 V
Antal mikrofon-indgange:	4
Kabine udgående (RCA):	2