Argox AS-8020CL Manual

Argox Stregkodelæser AS-8020CL

Læs gratis den danske manual til Argox AS-8020CL (18 sider) i kategorien Stregkodelæser. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Argox AS-8020CL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/18

NOTICE:

This equipment has been tested and complied with

the limits for a Class a digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to

provide a reasonable protection against harmful

interface when the equipment is operated under a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the

instruction manual, may cause harmful interface to

radio communications. Operation of this equipment in

a residential area is likely to cause harmful interface in

which case the user will be required to correct the

interface at his own expenses.

Note: All brands and trademarks shall belong to their

respective owner.

Note: Specification is subject to changes without

notice.

This device complies with Part 15 of the FCC Rules.

Operation shall be subject to the following two

conditions:

(1) This device may not cause harmful interface, and

(2)

This device must accept any interface received,

including interface that may cause undesirable

operation.

Using the ArgoxScan AS-8020CL

The ArgoxScan can automatically scan barcode at a distance.

Simply aim and pull the trigger. Code scanning is performed

along the center of the light bar emitted from the reading

window. This bar must cover the entire code (see “How to

Scan” in page 9).

Successful scanning shall be obtained by tilting the scanner

with respect to the barcode to avoid direct reflections that

impair the reading performance.

Recommended Steps

When the required settings have been configured, all settings

are stored in non- volatile memory of scanner and cradle

after reading EXIT Label. Recommended steps are as

follows.

1) Host interface will be automatically detected. User does

not need to set host interface for the cradle.

2) Set interface to optimize protocol of cradle with your

host in interface section.

3) Set system control of scanner, such as specific

adjustments double confirm, indicator and scanning

mode which you prefer usage in system control section.

4) Set code options of scanner for your usage in code

option section. You must make sure to enable the

symbology first, then Min./Max. code length, code ID

checksum and truncate digits are also converted.

5) Set string format of the scanner, such as preamble,

postamble Prefix, suffix, code ID and code name

transmission for your application in string format

section.

Note: If still not work properly. Please contact your dealer for

further information.

Produkt Specifikationer

Mærke:	Argox
Kategori:	Stregkodelæser
Model:	AS-8020CL

Har du brug for hjælp?

Hvis du har brug for hjælp til Argox AS-8020CL stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stregkodelæser Argox Manualer

Argox AS-8310 Manual

29 August 2024

Argox AR-3100 Manual

29 August 2024

Argox AI-6801 Manual

29 August 2024

Argox AS-8020CL Manual

29 August 2024

Argox AI-6821 Manual

28 August 2024

Argox AI-6821HD Manual

28 August 2024

28 August 2024

28 August 2024

28 August 2024

28 August 2024

Stregkodelæser Manualer

Nyeste Stregkodelæser Manualer

Newland NLS-EM3096 Manual

1 August 2025

Newland Lophius Bluetooth NVH220 Manual

1 August 2025

Newland NLS-EM1395-LD Manual

1 August 2025

Newland NLS-EM3080 Manual

1 August 2025

Newland FM530 Manual

1 August 2025

Newland NLS-EM3095 Manual

1 August 2025

Newland EM3080-01 Manual

1 August 2025

Newland EM3088-W Manual

1 August 2025

Newland EM2045-01 Manual

1 August 2025

Newland Lophius Corded NVH220 Manual

1 August 2025