Artsound Smart Hyde Manual


Læs gratis den danske manual til Artsound Smart Hyde (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Artsound Smart Hyde, eller vil du spørge andre brugere om produktet?

Side 1/8
1
Smart Hyde
USER MANUAL
Thank your for buying our Smart Hyde amplifier. We hope you’ll enjoy it for years to come. Please read these
instructions carefully and keep this manual for later reference. .
1. WARNINGS AND SAFETY
To prevent fire or electric shocks, the device must not be exposed to rain or humidity.
For your own safety: to prevent electric shocks do not remove the housing.
Do not try to repair any malfunctioning parts of the device yourself. Ask a professional expert to do this for you.
When plugged into the mains, the device remains electrically charged even when switched o.
2. CONTENTS
Check that the packaging contains the following parts:
1x Smart Hyde
1x Power supply
2x RCA cable
2x Antennas
1x User Manual
1. Warnings and safety 1
2. Contents 1
3. Interface and Functions
A. Front panel 2
B. Rear panel 2
4. Use 3
5. Installation 3
A. Unpack 3
B. Placement 3
C. Connect 3
D. Download the App 4
E. First time usage & WiFi setup 4
6. Connection via LAN 4
7. Connection via Bluetooth 4
8. 4Stream Application 4
A. Playback 4
B. Streaming from Mobile Phone / NAS /
Online Music Services 5
C. Device Settings 6
9. Firmware update 6
10. Technical Specifications 6
11. FAQ 7
12. Warranty conditions 7
2
SMART HYDE
3. INTERFACE AND FUNCTIONS
A FRONT PANEL
1. WiFi ANT: Antenna for WiFi connection
2. Reset: Short press to reset network, Long press
to factory reset
3. Line in R: Right channel audio input
4. Line in L: Left channel audio input
5. SW out: Audio output to an active subwoofer
6. OPT in: Optical digital audio input to connect tv
sound or others
7. LAN: For RJ45 LAN network
8. USB: Used to connect USB disk drive
9. Load switch: The switch to switch between 4-
load
**Unplug the power before switching**
10. Speaker output: Used to connect 4-8 Ω speakers
with phoenix connector
11. BT ANT: Antenna for Bluetooth connection
12. DC in: Used to connect power adaptor
13. LED: Indicates the status of the device
Blinking white: Power on and searching for
network
Solid white: Network connected
Solid blue: Bluetooth mode
Solid red: USB mode
Solid green: Line input mode
Solid purple: Optical input mode
14. USB Audio: Used to connect to PC to stream
music directly from PC
15. PRE out: Audio output to provide analog signal to
an amplifier, mixer, or other device.
16. Volume: Used to manually tune the device maxi-
mum volume, press to change audio input mode.
Volume range is large so you can turn the knob
around more than once.
17. Treble: Used to manually tune the treble, press to
reset to default value
18. Bass: Used to manually tune the bass, press to
reset to default value
B REAR PANEL


Produkt Specifikationer

Mærke: Artsound
Kategori: Ikke kategoriseret
Model: Smart Hyde

Har du brug for hjælp?

Hvis du har brug for hjælp til Artsound Smart Hyde stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Artsound Manualer

Artsound

Artsound SMART IN Manual

1 Januar 2025
Artsound

Artsound AKUSTILE-01 Manual

10 December 2024
Artsound

Artsound MDC620 Manual

11 November 2024
Artsound

Artsound MDC64 Manual

17 September 2024
Artsound

Artsound MDC6 Manual

12 September 2024
Artsound

Artsound WP-8000B Manual

4 September 2024
Artsound

Artsound WP-8000C Manual

4 September 2024
Artsound

Artsound MDC501 Manual

4 August 2024
Artsound

Artsound ART1.1 Manual

15 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer