AS Synthesizers Interface AS901 Manual


Læs gratis den danske manual til AS Synthesizers Interface AS901 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8 anmeldelser. Har du et spørgsmål om AS Synthesizers Interface AS901, eller vil du spørge andre brugere om produktet?

Side 1/4
BLOCK DIAGRAM OF
INTERFACE
AS901
MIXED SIGNAL MODULE
1
5
6
2 3 4
7
8 9
1. CV1 out, range: 0V to +10V
2. CV2 out, range: 0V to +10V
3. CV3 out, range: 0V to +10V or -5V to +5V
4. CV4 out, range: 0V to +10V or -5V to +5V
5. Digital outputs & indicators D1 to D8,
range: +5V TTL, pulse width: 2ms
6. Navigation buttons
7. 2x16 charaters LCD
8. MIDI indicator
9. USB MIDI indicator
PROGRAM CHANGE:
Using to fi nd the program you PGM/SEL
want to load in. Load: press YES
Do not load: press NO
SELECT MIDI SOURCE:
1. Press for 2 secSETUP
2. Choose MIDI source (MIDI or USB)
on Page 1 with using VALUE UP/DOWN
3. Leaving SETUP: press for 2 secEDIT/EXIT
EDIT PARAMETERS:
1. Entering EDIT menu: press EDIT/EXIT
for 2 sec
2. If in EDIT menu, press
to select outputsPGM/SEL UP/DOWN
3. Press PAGE LEFT/RIGHT to select
parameters of the outputs (CV1-4, D1-8)
4. Press VALUE UP/DOWN to change values
of the selected outputs
5. Exit from EDIT menu: press EDIT/EXIT
for 2 sec
6. Save: press SAVE for 2sec. use
to select thePGM/SEL UP/DOWN
number of the program you want to save
your settings into.
7. Save: press Don’t save: press YES, NO
8. If you don’t save the edited program,
you’ll see a star by the number of the
program. If you want to save, check 6.
FRONT PANEL OF
INTERFACE
AS901
MIXED SIGNAL MODULE


Produkt Specifikationer

Mærke: AS Synthesizers
Kategori: Ikke kategoriseret
Model: Interface AS901

Har du brug for hjælp?

Hvis du har brug for hjælp til AS Synthesizers Interface AS901 stil et spørgsmål nedenfor, og andre brugere vil svare dig