Ashly ne8250 Manual

Ashly Modtager ne8250

Læs gratis den danske manual til Ashly ne8250 (20 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Ashly ne8250, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

ASHLY AUDIO INC.

847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010

Toll-Free: (800) 828-6308 Fax: (585) 872-0739 www.ashly.com

All Trademarks referred to herein are the property of their respective owners.

ne4250, ne4250.25, ne4250.70, ne4250.10

Operating Manual

Network Enabled Multi-Channel Power Ampliers

ne8250, ne8250.25, ne8250.70, ne8250.10

Protea software is available for free download on the Ashly website.

Ashly no longer includes a software CD-ROM with new units.

Operating Manual - NE Multi Channel Power Amplier

Important Safety Instructions

Consignes de sécurité à lire attentivement

The lightning ash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may be of sufcient magnitude

to constitute a risk of electric shock to persons. The exclamation point

within an equilateral triangle is intended to alert the user to the presence

of important operating and maintenance instructions in the literature ac-

companying the device.

Le symbole de la èche dans un triangle équilateral symbolisant la foudre

est prévu pour sensibiliser l’utilisateur à la présence de tension de voltage

non isolée à l’intérieur de l’appareil. Elle pourrait constituer un danger de

risque de décharge électrique pour les utilisateurs. Le point d’exclamation

dans le triangle équilatérale alerte l’utilisateur de la présence de consignes

qu’il doit d’abord consulter avant d’utiliser l’appareil.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. To reduce the risk of re or electric shock, do not expose this apparatus

to rain or moisture.

6. Do not use this apparatus near water.

7. Clean only with dry cloth.

8. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

9. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus.

10. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not t into

your outlet, consult an electrician for replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the ap-

paratus.

12. Only use attachments/accessories specied by the manufacturer.

13. Use only with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

14. Unplug this apparatus during lightning storms or when unused for long

periods of time.

15. Refer all servicing to qualied service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into

the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Observez les avertissements.

4. Suivez ces instructions.

5. Pour réduire le risque de feu ou la décharge électrique, ne pas exposer

cet appareil pour pleuvoir ou l'humidité.

6. Ne pas utiliser l’appareil près de l’eau.

7. Le nettoyer à l’aide d’un tissus sec.

8. Ne pas bloquer les ouvertures de ventilation, installer selon les con-

signes du fabricant.

9. Eloigner des sources de chaleur tel: radiateurs, fourneaux ou autres

appareils qui produisent de la chaleur.

10. Ne pas modier ou amputer le système de la mise à terre. Une prise avec

mise à terre comprend deux lames dont une plus large ainsi qu’une mise

à terre: ne pas la couper ou la modier. Si la prise murale n’accepte pas la

che, consulter un électricien pour qu’il remplace la prise désuète.

11. Protéger le cordon de secteur contre tous bris ou pincement qui pour-

raient l’endommager, soit à la che murale ou à l’appareil.

12. N’employer que les accessoires recommandés par le fabricant.

13. N’utiliser qu’avec les systèmes de xation,chariots, trépied ou autres,

approuvés par le fabricant ou vendus avec l’appareil.

14. Débrancher l’appareil lors des orages électriques ou si inutilisé pendant

une longue période de temps.

15. Un entretient effectué par un centre de service accrédité est exigé si

l’appareil a été endommagé de quelque façon: si il a été exposé à la pluie,,

l’humidité ou s’il ne fonctionne pas normalement ou qu’il a été échappé.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference

2. This device must accept any interference received, including interference that may cause undesired operation

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in both a commercial and residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help..