Ashly Pema 8250 Manual

Ashly Modtager Pema 8250

Læs gratis den danske manual til Ashly Pema 8250 (28 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Ashly Pema 8250, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

ASHLY AUDIO INC.

847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010

Toll-Free: (800) 828-6308 Fax: (585) 872-0739 ashly.com

Protea Equipped Media Amplier

pema 8250

pema 8125

pema 4250

pema 4125

Operating Manual

Operating Manual - Pema Protea Equipped Media Amplier

Important Safety Instructions

Consignes de sécurité à lire attentivement

The lightning ash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may be of sufcient magnitude

to constitute a risk of electric shock to persons. The exclamation point

within an equilateral triangle is intended to alert the user to the presence

of important operating and maintenance instructions in the literature ac-

companying the device.

Le symbole de la èche dans un triangle équilateral symbolisant la foudre

est prévu pour sensibiliser l’utilisateur à la présence de tension de voltage

non isolée à l’intérieur de l’appareil. Elle pourrait constituer un danger de

risque de décharge électrique pour les utilisateurs. Le point d’exclamation

dans le triangle équilatérale alerte l’utilisateur de la présence de consignes

qu’il doit d’abord consulter avant d’utiliser l’appareil.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. To reduce the risk of re or electric shock, do not expose this ap-

paratus to rain or moisture.

6. Do not use this apparatus near water.

7. Clean only with dry cloth.

8. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

9. Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus.

10. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety. If the provided

plug does not t into your outlet, consult an electrician for replacement

of the obsolete outlet.

11. Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

12. Only use attachments/accessories specied by the manufacturer.

13. Use only with the cart, stand, tripod, bracket, or table specied by

the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

14. Unplug this apparatus during lightning storms or when unused for

long periods of time.

15. Refer all servicing to qualied service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Observez les avertissements.

4. Suivez ces instructions.

5. Pour réduire le risque de feu ou la décharge électrique, ne pas

exposer cet appareil pour pleuvoir ou l'humidité.

6. Ne pas utiliser l’appareil près de l’eau.

7. Le nettoyer à l’aide d’un tissus sec.

8. Ne pas bloquer les ouvertures de ventilation, installer selon les

consignes du fabricant.

9. Eloigner des sources de chaleur tel: radiateurs, fourneaux ou autres

appareils qui produisent de la chaleur.

10. Ne pas modier ou amputer le système de la mise à terre. Une prise

avec mise à terre comprend deux lames dont une plus large ainsi qu’une

mise à terre: ne pas la couper ou la modier. Si la prise murale n’accepte

pas la che, consulter un électricien pour qu’il remplace la prise désuète.

11. Protéger le cordon de secteur contre tous bris ou pincement qui

pourraient l’endommager, soit à la che murale ou à l’appareil.

12. N’employer que les accessoires recommandés par le fabricant.

13. N’utiliser qu’avec les systèmes de xation,chariots, trépied ou

autres, approuvés par le fabricant ou vendus avec l’appareil.

14. Débrancher l’appareil lors des orages électriques ou si inutilisé

pendant une longue période de temps.

15. Un entretient effectué par un centre de service accrédité est exigé

si l’appareil a été endommagé de quelque façon: si il a été exposé à la

pluie,, l’humidité ou s’il ne fonctionne pas normalement ou qu’il a été

échappé.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference

2. This device must accept any interference received, including interference that may cause undesired operation

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in both a commercial and residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help..