Atdec SD-FS-T-TAA Manual

Atdec Ikke kategoriseret SD-FS-T-TAA

Læs gratis den danske manual til Atdec SD-FS-T-TAA (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Atdec SD-FS-T-TAA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

D Horizontal Rail

Brace

C Horizontal Rail

T Screw M8x40mm

Component Checklist

Installation Instructions

SD-FS-T

IMPORTANT INFORMATION:

Step 1. Install the Pole to the desk.

Step 2. Assemble Horizontal Support Rail.

! IMPORTANT - Install Spacedec Free Standing Triple as per Installation Instructions.

! This product supports a maximum load of 8kg (17.5lbs) in each screen.

! This product supports VESA mounting hole configurations: 75x75mm and 100x100mm.

! This product is designed to support three screens of similar weight & size when configured to use the freestanding base.

! Using less than three screens may result in the stand becoming unbalanced & unstable.

! The manufacturer accepts no responsibility for incorrect installation.

Check you have received all parts against the component checklist and Hardware.

Spacedec Freestanding Triple

A. Pole

B. Freestanding Base

C. Horizontal Rail (x2)

D. Horizontal Rail

Brace

E. Pole Cover

F. Mounting Head

L/R (x2)

G. Mounting Head

Centre

I. Pole Top

Cap (x2)

J. Spanner

L. Washer 3/8”

M. Spring

Washer 3/8”

O. Screen Mounting

Screw M4x10 (x12)

P. Screw M8x12mm (x2)

U. Screw M6x8mm (x2)

T. Screw M8x40mm (x4)

R. Allen Key M4

H. Cable Clip

w/ Screw (x6)

K. Bolt Through

Plate

N. Bolt 3/8”

Q. Screw

M6x30mm (x3)

S. Allen Key M5

Desk

A Pole

K Bolt Through Plate

L Washer 3/8”

M Spring Washer 3/8”

N Bolt 3/8”

Hardware:

Tools Required:

Phillips Head Screw Driver

Option 1: Bolt Through

Option 2: Freestanding (with optional security bolt)

Screw M8x40mm

Allen Key M5

Screw M6x8mm

Mounting Head - Centre

Bracket

TIGHTEN

A Pole

Q Screw

M6x30mm

B Freestanding

Base

K Bolt Throug Plate

L Washer 3/8”

M Spring Washer

Desk

Bolt 3/8”

TIGHTEN

Allen Key M4

1. Loosen Thumb Screw.

2. Detach Bracket to mount into Horizontal Rail.

G. Mounting Head - Centre

DETACH

LOOSEN

Spacedec

Cable Clip H

Installation Complete

No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 18.08.11

Step 8. Cable Management

H Cable Clip

Step 3. Install Horizontal Rail to the Pole.

P Screw M8x12mm

S Allen Key M5

E Pole Cover

Horizontal Rail

Sub-Assembly

Pole

Pole Top Cap

INSERT

Step 4. Adjust Horizontal Rail Position.

Ensure horizontal rail is attached to

vertical pole with arrow facing upwards.

Select the desired height of your rail to

suit your screen size by inserting the

screws in the various holes in the pole.

TIGHTEN

Step 4. Fasten Display to Mounting Heads.

Step 6. Attach Display to Horizontal Rail.

O Screen Mounting

Screw M4x10mm

F Mounting Head

- L/R

End

Display

TOP

Centre

Display

O Screen Mounting

Screw M4x10mm

G Mounting Head

- Centre

TOP

To adjust the tension of the

tilt mechanism, first remove

the cover cap to expose the

tilt nut then using the

spanner supplied, tension

the nut until the display

holds the desired position.

Replace cover cap.

Remove rail end cap screw (3) & end cap

(2). Slide Mounting head(1) onto rail &

replace end cap.

Step 7. Adjust Display Tilt Tension.

TIGHTEN

End Display

Manage your cables by attaching the cable

clips to the rail & inserting your cables.

Cables can be routed through pole & exit

at the bottom cable port.

Produkt Specifikationer

Mærke:	Atdec
Kategori:	Ikke kategoriseret
Model:	SD-FS-T-TAA
Produktfarve:	Sort
Monteringstype:	Skrivebord
Maksimal vægtkapacitet:	8 kg
Maksimal skærmstørrelse kompatibilitet:	25 "
Antal understøttede skærme:	3
Minimal skærmstørrelse kompatibilitet:	25 "
Montering interface kompatibilitet (min.):	75 x 75 mm
Montering interface kompatibilitet (maks.):	100 x 100 mm