Atdec VF-AT-W Manual


Læs gratis den danske manual til Atdec VF-AT-W (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Atdec VF-AT-W, eller vil du spørge andre brugere om produktet?

Side 1/4
Installation Instructions
VF-AT-W
Component Checklist
Focus | Articulated Arm | Wall
M4x10/12/16mm (x4)
Phillips Head
Mounting Screws
Primary Arm
Cable Cover
Secondary Arm
Cable Cover
End CapArm Assembly
Wall Plate
5mm
Allen Key
Nylon Anchor
Plug (x2)
M4 x 12mm
Countersunk
Screw (x2)
M6 x 50mm
Countersunk
Screw (x2)
2.5mm
Allen Key
Display Mounting
Screws
HARDWARE
! IMPORTANT - Install Visidec Focus Articulated Arm Wall as per installation instruction.
! This product supports a maximum load of 8kg (17.6lbs).
! The manufacturer accepts no responsibility for incorrect installation.
IMPORTANT INFORMATION:
Step 1. Check Components
Check what you have received against the component checklist and hardware above.
Step 2. Position Wall Plate
As a guide, it is recommended that the bottom of the Wall Plate be positioned approximately 140mm (5 1/2”)
above the desktop.
For further Ergonomic Guidelines, please refer to the end of the document.
Note: The Focus
Articulated Arm Wall
provides vertical
adjustment of 128mm.
Tools Required:
Power Drill
5.5mm (1/4”) Drill Bit
8mm (5/16”) Drill Bit
Phillips Head Screwdriver
128mm (5”)
140mm (5 1/2”)


Produkt Specifikationer

Mærke: Atdec
Kategori: Ikke kategoriseret
Model: VF-AT-W

Har du brug for hjælp?

Hvis du har brug for hjælp til Atdec VF-AT-W stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Atdec Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer