Atlona AT-HDR-EX-100CEA-TX Manual

Atlona Ikke kategoriseret AT-HDR-EX-100CEA-TX

Læs gratis den danske manual til Atlona AT-HDR-EX-100CEA-TX (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Atlona AT-HDR-EX-100CEA-TX, eller vil du spørge andre brugere om produktet?

Side 1/9
1
Installation Guide
AT-HDR-EX-100CEA-TX
4K HDR HDBaseT Transmitter with Control and Ethernet
AT-HDR-EX-100CEA-TX
The Atlona AT-HDR-EX-100CEA-TX is a HDBaseT™ transmitter for 4K and high dynamic range
(HDR) content. It supports extension of 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling plus
HDR data, multi-channel audio, Ethernet, control signals, and power up to 330 ft (100 m) over
Category 6/6A cable.
The HDR-EX-100CEA-TX is ideal for use with the AT-HDR-EX-100CEA-RX receiver for
transmitting 4K HDR in point-to-point applications. It can also be used with the AT-UHD-
CLSO-824 and AT-UHD-SW-5000ED for transmitting 4K/UHD @ 60 Hz 4:2:0 signals to the
switchers from a remote source.
IMPORTANT: Visit https://atlona.com/product/at-hdr-ex-100cea-tx for the latest
rmware updates and Installation Guide.
Package Contents
1 x AT-HDR-EX-100CEA-TX
2 x Mounting brackets
4 x Mounting screws
1 x 48V DC power supply
1 x 2-pin captive screw connector
1 x 5-pin captive screw connector
2
Installation Guide
AT-HDR-EX-100CEA-TX
LAN
HDMI OUTHDBaseT IN
TX TX RXRX P
IRRS-232
IN
OPTICAL
DC 48V HDMI IN LANHDBaseT OUTOPTICAL
TX TX RXRX
-
+
OUT
IRRS-232
POWER
LINKTEST
AT-HDR-EX-100CEA-TX
1. LINK
2. FW
3. TEST
4. 5V LOCK
UTILITY
POWER
LINK
AT-HDR-EX-100CEA-RX
FW
LAN
HDMI OUTHDBaseT IN
TX TX RXRX P
IRRS-232
IN
OPTICAL
DC 48V HDMI IN LANHDBaseT OUTOPTICAL
TX TX RXRX
-
+
OUT
IRRS-232
POWER
LINKTEST
AT-HDR-EX-100CEA-TX
1. LINK
2. FW
3. TEST
4. 5V LOCK
UTILITY
POWER
LINK
AT-HDR-EX-100CEA-RX
FW
Panel Descriptions
1 TEST
Quick and easy test for cables when used
with the AT-HDR-EX-100CEA-RX. Use
the button to start the test and the LED to
determine pass or fail.
2 UTILITY
Connect a mini-USB to USB-A cable from
this port to a computer for updating and
testing. Rotate the dial to set the unit into
dierent modes.
3 POWER and LINK LEDs
The power LED will illuminate green when
receiving power. The link LED will glow
yellow when signal is being sent/received
between the transmitter and the receiver.
4 DC 48V
Connect the included power supply to this
port.
5 OPTICAL OUT
This port is only available for audio pass
through when used with the AT-HDR-EX-
100CEA-RX.
6 RS-232 / IR
Connect the included 5-pin captive screw
connector to this port.
7 HDBaseT OUT
Connect an Ethernet cable from this port
to the HDBaseT input on a compatible
receiver.
8 HDMI IN
Connect an HDMI cable from this port to a
UHD/HD source.
9 LAN
Connect an Ethernet cable from this port
to a network switch.
4 75 86 9
2 31


Produkt Specifikationer

Mærke: Atlona
Kategori: Ikke kategoriseret
Model: AT-HDR-EX-100CEA-TX

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlona AT-HDR-EX-100CEA-TX stil et spørgsmål nedenfor, og andre brugere vil svare dig