Atlona AT-PRO5-101-RX Manual

Atlona Ikke kategoriseret AT-PRO5-101-RX

Læs gratis den danske manual til Atlona AT-PRO5-101-RX (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Atlona AT-PRO5-101-RX, eller vil du spørge andre brugere om produktet?

Side 1/8
1
Installation Guide
AT-PRO5-101-RX
4K HDR SDVoE Receiver
for PRO5 Matrix Switcher
AT-PRO5-101-RX
The Atlona AT-PRO5-101-RX is an AV extension receiver, featuring SDVoE
® 10GbE connectivity
for receiving ultra-high denition video and audio from the AT-PRO5-MX810 matrix switcher. Part
of the PRO5 Series, the PRO5-101-RX is HDCP 2.3 compliant, and supports 4K/60 4:4:4 and
HDR at HDMI data rates up to 18 Gbps. It features an RJ45 port, and an SFP+ cage for copper
or ber optic connectivity to receive video, embedded audio, Gigabit Ethernet, and RS-232
and IR control signals from the matrix switcher. The RJ45 port allows extension up to 330 feet
(100 meters) over CAT6a UTP cable, along with PoE for powering the PRO5-101-RX, while the
SFP+ cage can be used with a compatible ber optic module to extend from 38 meters up to 10
kilometers over ber optic cable. The PRO5-101-RX SDVoE receiver, together with the PRO5-
MX810 HDMI to SDVoE matrix switcher, is ideal for a wide range of commercial applications
requiring multi-zone AV distribution with long-distance signal extension.
1 x AT-PRO5-101-RX
1 x 3-pin captive screw connector
2 x 5-pin captive screw connectors
1 x Insert w/ QR code
Package Contents
2
Installation Guide
AT-PRO5-101-RX
1 LED Indicators
Displays the current state of the unit:
PWR - LED will be green when the
unit is powered.
STATUS - LED will be solid green
when the signal is encrypted with
HDCP. If the signal is not encrypted,
the LED will blink green. If no video
signal is detected, then the LED will
be o.
VIDEO - LED will be solid green
when video is passing through the
AT-PRO5-SC-RX.
LINK - LED will be solid green when
a link has been established with AT-
PRO5-MX810.
RJ45 - LED will be solid green when
the RJ45 port is being used.
SPF+ - LED will be solid green when
and SFP+ module is being used.
2 RESET
Press this recessed button, using a
paperclip or other small object, to perform
a factory-reset on the unit.
3 SET
These DIP switches control the function
of both the and RJ45 SFP+ port. Refer to
DIP Switch Settings (page 4) for more
information.
Front Panel Descriptions
32
SETRESETSTAT US VIDEO LINK RJ45 SFP+
AT-PRO5-101-RX
1
ON
2 3 4
1


Produkt Specifikationer

Mærke: Atlona
Kategori: Ikke kategoriseret
Model: AT-PRO5-101-RX

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlona AT-PRO5-101-RX stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Atlona Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer