Atlona AT-VTP-550 Manual

Atlona Ikke kategoriseret AT-VTP-550

Læs gratis den danske manual til Atlona AT-VTP-550 (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Atlona AT-VTP-550, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/9
Installation Guide
AT-VTP-550
1
Velocity 5.5” Touch Panel
AT-VTP-550-WH and AT-VTP-550-BL
The Atlona AT-VSP-550-BL and AT-VTP-550-WH are 5.5” touch panels in black and white,
respectively, for the Atlona Velocity™ Control System. They feature contemporary, rened styling
for modern presentation environments with 720x1280 native resolution, and a capacitive glass
surface that supports multi-touch and gesture interactions. These touch panels conveniently
install into a wall or furniture via a US or Euro one-gang opening. The VTP-550-BL and VTP-550-
WH feature Power over Ethernet (PoE), enabling a single network connection for data and power.
Setting up the touch panels is eortless as the AV control GUI is automatically uploaded from the
Velocity Control Gateway processor during system conguration.
1 x AT-VTP-550
1 x Metal mounting plate
4 x Mounting screws
1 x Installation Guide
Package Contents
Operating Notes
• The Velocity 5” Touch Panel (AT-VTP-550) must be on the same network as the Velocity
Gateway (AT-VGW-HW) or it will be unable to sync for control.
• The AT-VTP-550 is PoE capable, to power the unit, simply plug it into a 802.3at compatible
network switch. If the network switch is not PoE capable, a PoE injector (purchased separately)
can be used.
IMPORTANT: Velocity Gateway (AT-VGW-HW) must be set up before the AT-VTP-550 is
fully functional.
Installation Guide
AT-VTP-550
2
Mounting Instructions
The AT-VTP-550 can be mounted to a 1 gang back plate.
1 Select the type of 1 gang back box to use and install into a wall.
2 Thread the Ethernet cable through the 1 gang box.
3 Install the included mounting plate into the 1 gang box.
a If using a UK back box, place the screws in the two inside mounting holes.
b If using a US back box, place the screws through the outside screw holes.
4 Loosen or remove the two screws located at the top and bottom of the unit.
5 Place the unit onto the metal back plate, the dual prongs inserting into the small opening on
the back of the unit.
6 Tighten/attach the screws at the top and bottom of the touch pad.
NOTE: Install using the region’s safety guidelines for electrical boxes.
NOTE: To avoid damage to the unit, do not overtighten the screws.
24V DC / 0.5A
LAN / PoE
802.3af compliant
Designed in the USA
Manufactured in Taiwan

Produkt Specifikationer

Mærke: Atlona
Kategori: Ikke kategoriseret
Model: AT-VTP-550

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlona AT-VTP-550 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Atlona Manualer

Atlona

Atlona AT-VGW-250 Manual

19 Juli 2025
Atlona

Atlona AT-USB-EX350-KIT Manual

7 Juli 2025
Atlona

Atlona AT-HDR-EX-100CEA-TX Manual

6 Juli 2025
Atlona

Atlona AT-HDR-EX-70C-TX Manual

31 Marts 2025
Atlona

Atlona AT-PRO5-101-SC-RX Manual

1 Februar 2025
Atlona

Atlona AT-PRO5-101-RX Manual

30 Januar 2025
Atlona

Atlona AT-VGA2401 Manual

14 Januar 2025
Atlona

Atlona AT-VGA18A Manual

14 Januar 2025
Atlona

Atlona AT-HDCAT-8 Manual

13 Januar 2025
Atlona

Atlona AT-VGA100-SR Manual

8 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MiVue 630 Manual

1 August 2025
Hozelock

Hozelock 4712 Manual

1 August 2025
Navman

Navman Platinum S150 Manual

1 August 2025
Navman

Navman AUTO500 DUAL Manual

1 August 2025
Navman

Navman MiVue 150 SAFETY Manual

1 August 2025
Navman

Navman MiVue 338 Manual

1 August 2025
Navman

Navman MyTruck II Manual

1 August 2025
Navman

Navman S-Series Classic S45 Manual

1 August 2025
Navman

Navman EZY30 Manual

1 August 2025
Navman

Navman AUTO300 WIFI Manual

1 August 2025