Audio-Technica AT2041SP Manual

Audio-Technica Ikke kategoriseret AT2041SP

Læs gratis den danske manual til Audio-Technica AT2041SP (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Audio-Technica AT2041SP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

20 series studio microphones

AT2050

Multi-pattern Condenser Side-Address Microphone

Features

• Designed for critical home/project/professional studio

applications and live performance

• Three switchable polar patterns: omni, cardioid, gure-of-eight

• Dual-diaphragm capsule design maintains precise polar pattern

denition across the full frequency range of the microphone

• Dual large diaphragms are gold-vaporized and aged to achieve

optimum characteristics over years of use

• Rugged design and construction for reliable performance

• Included shock mount provides superior isolation

• Integral 80 Hz high-pass lter switch and 10 dB pad switch

• State-of-the-art design and manufacturing techniques ensure

compliance with A-T’s stringent consistency and reliability

standards

Description

The AT2050 is a large-diaphragm side-address externally polarized

(DC bias) condenser microphone with three switchable polar patterns:

omnidirectional, cardioid, and gure-of-eight. It is designed for home/

project/professional studio applications and live performance.

The microphone requires 11V to 52V phantom power for operation.

The omnidirectional polar pattern is sensitive to sound coming from

all directions. Select the omni pattern to pick up several voices or

instruments on the same microphone, to diminish proximity effect, and

to preserve the location’s ambient sound.

The cardioid polar pattern is more sensitive to sound originating directly

in front of the element, making it useful in controlling feedback, reducing

pickup of unwanted sounds and providing isolation between performers.

The gure-of-eight polar pattern is more sensitive to sound originating in

the front and back of the microphone, rejecting sounds from the sides.

It is often used in conjunction with advanced stereo miking techniques.

The output of the microphone is a 3-pin XLRM-type connector.

The microphone is equipped with a switchable 10 dB pad and a switch

that permits choice of at response or low-frequency roll-off (via integral

80 Hz high-pass lter).

The microphone is enclosed in a rugged housing. The included AT8458

shock mount provides superior isolation and permits mounting on any

microphone stand with 5/8"-27 threads. A soft protective pouch is also

included.

Operation and Maintenance

The AT2050 requires 11V to 52V phantom power for operation.

Output is low impedance (Lo-Z) balanced. The signal appears across Pins

2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive

acoustic pressure produces positive voltage at Pin 2.

To avoid phase cancellation and poor sound, all mic cables must be wired

consistently: Pin 1-to-Pin 1, etc.

An Audio-Technica emblem and the pattern-selection switch are on the

front of the microphone. Position this side of the microphone toward the

sound source.

The pattern-selection switch provides user-selection of omnidirectional,

cardioid, and gure-of-eight polar patterns. To select the omnidirectional

polar pattern, slide the switch to the circular polar pattern image. To

select the cardioid polar pattern, slide the switch to the heart-shaped

polar pattern image. To select the gure-of-eight pattern, slide the switch

to the gure-eight shaped polar pattern image.

An integral 80 Hz high-pass lter provides easy switching from a at

frequency response to a low-end roll-off. The roll-off position reduces the

microphone’s sensitivity to popping in close vocal use. It also reduces

the pickup of low-frequency ambient noise (such as trafc, air-handling

systems, etc.), room reverberation and mechanically coupled vibrations.

To engage the high-pass lter, slide the switch toward the “bent” line.

The microphone is also equipped with a switchable 10 dB pad that lowers

the microphone's sensitivity, thus providing higher SPL capability for

exible use with a wide range of users and system congurations. To

engage the 10 dB pad, slide the switch toward the -10 position.

In use, secure the cable to the mic stand or boom, leaving a slack loop at

the mic. This will ensure the most effective shock isolation and reduce

the possibility of accidentally pulling the microphone out of its mount.

Avoid leaving the microphone in the open sun or in areas where

temperatures exceed 110° F (43° C) for extended periods. Extremely high

humidity should also be avoided.

Architect’s and Engineer’s Specications

The microphone shall be a large-diaphragm side-address externally

polarized (DC bias) condenser with user-switchable omnidirectional,

cardioid, and gure-of-eight polar patterns and a frequency response of

20 Hz to 20,000 Hz. The microphone shall operate from an external 11V

to 52V DC phantom power source. It shall be capable of handling sound

input levels up to 149 dB (159 dB with 10 dB pad) with a dynamic range

of 132 dB. Nominal open-circuit output voltage shall be 7.9 mV at 1V, 1

Pascal. Output shall be low impedance balanced (120 ohms).

The output of the microphone shall be a 3-pin XLRM-type connector.

The microphone shall be equipped with a switchable 10 dB pad, a switch

that permits choice of at response or 80 Hz low-frequency roll-off, and a

polar pattern selection switch.

AT2050

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224

Audio-Technica Limited, Old Lane, Leeds LS11 8AG England

Specications

LEGEND

200 Hz

1 kHz

5 kHz

8 kHz

SCALE IS 5 DECIBELS PER DIVISION

240˚

180˚

210˚

270˚

300˚

330˚ 0˚

150˚

120˚

90˚

30˚

60˚

12" or more on axisLEGEND

Frequency in Hertz

Response in dB

10 dB

100

50 200 10k5k1k500 2k 20k

Roll-off

Same as 1 kHz

LEGEND

200 Hz

1 kHz

5 kHz

8 kHz

SCALE IS 5 DECIBELS PER DIVISION

240˚

180˚

210˚

270˚

300˚

330˚

0˚

150˚

120˚

90˚

30˚

60˚

12" or more on axisLEGEND

Frequency in Hertz

Response in dB

10 dB

100

50 200 10k

500 2k 20k

Roll-off

LEGEND

200 Hz

1 kHz

5 kHz

8 kHz

SCALE IS 5 DECIBELS PER DIVISION

240˚

180˚

210˚

270˚

300˚

330˚ 0˚

150˚

120˚

90˚

30˚

60˚

12" or more on axisLEGEND

Frequency in Hertz

Response in dB

10 dB

100

50 200 10k5k1k500 2k 20k

Roll-off

Same as 1 kHz

cardioid frequency response:

20–20,000 Hz

omni frequency response:

20–20,000 Hz

gure-of-eight frequency

response: 20–20,000 Hz

polar pattern

Externally polarized (DC bias) condenser

Cardioid, Omnidirectional, Figure-of-eight

20-20,000 Hz

80 Hz, 12 dB/octave

–42 dB (7.9 mV), re 1V at 1 Pa

120 ohms

149 dB SPL, 1 kHz at 1% T.H.D.;

159 dB SPL, with 10 dB pad (nominal)

17 dB SPL

132 dB, 1 kHz at Max SPL

77 dB, 1 kHz at 1 Pa

11-52V DC, 4.7 mA typical

Polar selection; Flat, roll-off;

10 dB pad (nominal)

412 g (14.5 oz)

170.0 mm (6.69") long,

52.0 mm (2.05") maximum body diameter

Integral 3-pin XLRM-type

AT8458 shock mount for 5/8"-27

threaded stands; 5/8"-27 to 3/8"-16

threaded adapter; soft protective pouch

Element

Polar patterns

Frequency response

Low frequency roll-off

Open circuit sensitivity

Impedance

Maximum input sound level

Noise

Dynamic range (typical)

Signal-to-noise ratio1

Phantom power requirements

Switches

Weight

Dimensions

Output connector

Audio-Technica case style

Accessories furnished

In the interest of standards development, A.T.U.S.

offers full details on its test methods to other industry

professionals on request.

1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

1 Typical, A-weighted, using Audio Precision System One.

Specications are subject to change without notice.

The microphone shall be 170.0 mm (6.69") long and have a maximum

body diameter of 52.0 mm (2.05"). Weight shall be 412 grams (14.5 oz).

The microphone shall include a shock mount and a soft protective pouch.

The Audio-Technica AT2050 is specied.

461

Produkt Specifikationer

Mærke:	Audio-Technica
Kategori:	Ikke kategoriseret
Model:	AT2041SP

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica AT2041SP stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Audio-Technica Manualer

Audio-Technica AT-HDSL1 Manual

2 August 2025

Audio-Technica AT85EP Manual

2 August 2025

Audio-Technica AT6028 Manual

20 Juli 2025

Audio-Technica AT-VM670xSP Manual

19 Juni 2025

Audio-Technica AT-VM740xML Manual

18 Juni 2025

Audio-Technica AT-VM510xCB Manual

18 Juni 2025

Audio-Technica AT-VM520xEB Manual

18 Juni 2025

Audio-Technica AT-VM750xSH Manual

18 Juni 2025

Audio-Technica AT-VM520xEBH Manual

17 Juni 2025

Audio-Technica AT-VM610xMONO Manual

17 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Daewoo AVS1425 Manual

13 September 2025

Tineco iFloor 2 Manual

13 September 2025

SolarEdge SE50K-RW00IBNM4 Manual

13 September 2025

Varta CellPac LITE Manual

13 September 2025

Daewoo COL1317 Manual

13 September 2025

Hauppauge HD PVR 2 Gaming Edition Manual

13 September 2025

Systemair Airline H-106 Manual

13 September 2025

Daewoo AVS1350 Manual

13 September 2025

Daewoo AVS1411 Manual

13 September 2025

Varta Wireless Charger Multi 57906 Manual

13 September 2025