Audio-Technica BPHS2a Manual

Audio-Technica Hovedtelefoner BPHS2a

Læs gratis den danske manual til Audio-Technica BPHS2a (3 sider) i kategorien Hovedtelefoner. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Audio-Technica BPHS2a, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

User Manual

Broadcast Stereo Headset with Dynamic Boom Microphone /

Broadcast Stereo Headset with Condenser Boom Microphone /

Single-Ear Broadcast Headset with Dynamic Boom Microphone

BPHS2a/BPHS2Ca/BPHS2Sa

Part names

Refer to the ﬁgures and conﬁrm the parts of the headphones before use.

1 Head pad

2 Headband

3 Slider

4 Housing

5 Arm

6 Earpad

7 Gooseneck

8 Dynamic boom microphone

9 Condenser boom microphone

10 Temple pad

Cleaning the product

Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not

use alcohol, paint thinners or other solvents for cleaning purposes.

• To clean, wipe the main unit with a dry cloth.

• Wipe away perspiration and any other dirt from the cable with a dry cloth immediately after

use. Failure to clean the cable may cause it to deteriorate and harden over time, resulting in

malfunction.

• Wipe the plug with a dry cloth if dirty. Failure to clean the plug may cause the sound to cut out and

may cause noise.

• Wipe the earpads and head pad with a dry cloth if dirty. Perspiration or water on the earpads or

head pad may cause discoloration. Wipe with a dry cloth and allow to dry in the shade.

•If the product will not be used for an extended period of time, store it in a well-ventilated place

free from high temperatures and humidity.

•The earpads, head pad, and temple pad are consumable items. They will deteriorate over time

due to use and storage, so replace them when necessary. For information about replacing

earpads, head pad, or other parts, or for information about other serviceable parts, contact your

local Audio-Technica dealer.

BPHS2a

BPHS2Ca BPHS2Sa

Using the product

You can use the microphone on the left or right side of your face by rotating the microphone boom

as shown in the ﬁgure.

Positioning the microphone boom

Use the microphone boom and gooseneck to place the microphone in the correct position.

Position the microphone boom so that the

microphone is about 20 mm (0.79”) from the tip of

your mouth. Positioning the microphone directly in

front of your mouth will cause popping and other

noise from breathing.

20 mm

(0.79”)

W screen

Connecting the product

Connect cables such as BPCB2 (included) or BPCB3 (sold separately) to the connector jack of the

product.

BPCB2

Cable for BPHS2 (all models) with a TA6F connector at one end and 3-pin XLRM connector and 6.3

mm (1/4") plug at the other.

Function TA6F 3-pin XLRM 6.3 mm (1/4") plug

Microphone

MIC + PIN 5 PIN 2 HOT -

MIC – PIN 6 PIN 3 COLD -

SHIELD PIN 1 PIN1 GND -

Headphones

SPEAKER − PIN 2 - SLEEVE

SPEAKER R+ PIN 4 - RING

SPEAKER L+ PIN 3 - TIP

BPCB3

Cable for BPHS2 (all models) with a TA6F connector at one end and unterminated connector at the

other.

Function TA6F Unterminated

Microphone

MIC + PIN 5 RED

MIC – PIN 6 YELLOW

SHIELD PIN 1 COPPER

Headphones

SPEAKER − PIN 2 BLACK

SPEAKER R+ PIN 4 RED

SPEAKER L+ PIN 3 GREEN

About Hearing Damage

WARNING!

USE AS LOW A VOLUME AS POSSIBLE. PERMANENT HEARING DAMAGE CAN RESULT FROM

USING THIS PRODUCT AT EXCESSIVE VOLUMES.

For safe operation of this product, do not listen at excessive sound pressure levels.

Most national safety and health administrations have established guidelines for maximum time being

exposed to sound pressure levels before hearing damage occurs.

Sound pressure levels (SPL) Maximum time being exposed

85dB (A) SPL 8 hours

88dB (A) SPL 4 hours

91dB (A) SPL 2 hours

94dB (A) SPL 1 hour

97dB (A) SPL 30 minutes

100dB (A) SPL 15 minutes

120dB (A) SPL avoid or hearing damage may occur

To protect your ears from hearing damage:

• Use the product at the lowest volume possible; turn up the volume only enough to hear.

• Be aware that ringing in your ears may indicate that the volume is set too high.

• Have your ears examined regularly by an audiologist.

• If wax builds up in your ears, stop using the product until you have seen an audiologist.

• Stop using the product if you experience ear discomfort or infection.

BPCB2 BPCB3

while pressing

the button to

disconnect the

cable.

3-pin XLRM

XLRM

6. ug

SLEE

TA6F

Produkt Specifikationer

Mærke:	Audio-Technica
Kategori:	Hovedtelefoner
Model:	BPHS2a

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica BPHS2a stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hovedtelefoner Audio-Technica Manualer

Audio-Technica ATH-R30x Manual

28 Marts 2025

Audio-Technica ATH-R50x Manual

26 Februar 2025

Audio-Technica ATH-PRO5X Manual

11 Januar 2025

Audio-Technica ATH-G1 Manual

11 Januar 2025

Audio-Technica ATH-ES10 Manual

6 December 2024

Audio-Technica ATH-WS55i Manual

6 December 2024

Audio-Technica ATH-S600 Manual

6 December 2024

Audio-Technica ATH-PDG1 Manual

6 December 2024

Audio-Technica ATH-PRO5MK3 Manual

6 December 2024

Audio-Technica ATH-300TV Manual

6 December 2024

Hovedtelefoner Manualer

Nyeste Hovedtelefoner Manualer

Trust Nouna 25277 Manual

3 April 2025

PowerLocus P2 Manual

3 April 2025

Sennheiser RS 120-W Manual

1 April 2025

Celly PC2USBCEARPIN Manual

1 April 2025

Celly Ultrasound Manual

1 April 2025

1 April 2025

1 April 2025

1 April 2025

1 April 2025

1 April 2025