AudioControl LC2I Manual


Læs gratis den danske manual til AudioControl LC2I (4 sider) i kategorien Audio/video konverter. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 12 anmeldelser. Har du et spørgsmål om AudioControl LC2I, eller vil du spørge andre brugere om produktet?

Side 1/4
GREAT SOUND FROM
YOUR FACTORY RADIO!”
®
TWO CHANNEL LINE OUTPUT
CONVERTER WITH ACCUBASS
FACTORY SYSTE M UP GR A DE
“Maximum Processing with Minimal Eort
AudioControl’s new Matrix DSP processors
When you require total control and optimization to
achieve great sound quality, AudioControl Digital
Signal Processors are the solution. The powerful
DM-810™ DM-608™ and DSP processors allow users to
truly optimize the performance of their audio system, regardless
of whether they are using a factory or aftermarket source, and
to truly achieve our goal “Making Good Sound Great. These
highly versatile Digital Signal processors are equipped with
key features, such as active speaker-level inputs, line-level and
digital audio inputs, providing up to 10 channels of output.
AudioControl’s “smart user interface contains the power
of AudioControl processing through a exible PC interface
packed full of features and simply laid out. Includes signal
summing, 30 bands of equalization, signal time-alignment, in-
put delay and phase correction, plus AudioControl proprietary features like
AccuBASS®, GTO™ Signal Sense, and MILC™ as well as integrated input and output RTAs.
AccuBASS® Level control
AccuBASS®
Threshold control
3. If you hear a spot where the bass just drops right out…stop.
Leave the volume there and go to your LC2i.
4. Set the AccuBASS Level control on the top of LC2i to the ®
center detent.
5. Now, use a small screwdriver to turn the Threshold control
clockwise slowly until you hear the bass pop back in.
6. Re-adjust the AccuBASS Level control on the top of the unit ®
to get the proper amount of bass compensation, and you’re
ready for some ground pounding bass. OK, what if your bass
doesn’t roll o, but you still want more?
No problem! Turn the AccuBASS Level control fully down, ®
rotate the threshold control fully clockwise to lock in the bass
equalization. Now you can turn up the AccuBASS Level con®-
trol for the amount of bass you want.
Level Matching:
For a video on Level Matching go to:
https://youtu.be/fmR2VrXHfbg or scan the
code at the left.
GTO™ Selector
GTO™ Great Turn On: No need to look for a trigger wire.
However you still need power and ground.
Connect the speaker level inputs and as soon as you turn on
the factory audio system the LC2i will power up as well. After
the LC2i turns on, it provides a 12 volt trigger output to turn
on your amplier. A Jumper which you can reach from the
end panel allows you to set this feature on/o for specialized
installations. The factory default setting for the GTO™ circuit is
always ON.
Setting the AccuBASS® Bass Compensation:
Factory speaker systems have trouble reproducing loud
clean bass. Some companies systems limit the bass at higher
volumes so as not to damage speakers. The AccuBASS circuit ®
puts that bass back.
Heres how you set it up. After the LC2i /Amps/ and speakers
are installed and ready go:
1. Turn the system on and play some music with a good bass
track.
2. Turn the volume up while listening for the bass.
®
TWO CHANNEL LINE OUTPUT
CONVERTER WITH ACCUBASS


Produkt Specifikationer

Mærke: AudioControl
Kategori: Audio/video konverter
Model: LC2I

Har du brug for hjælp?

Hvis du har brug for hjælp til AudioControl LC2I stil et spørgsmål nedenfor, og andre brugere vil svare dig




Audio/video konverter AudioControl Manualer

Audio/video konverter Manualer

Nyeste Audio/video konverter Manualer