Audix ADX51 Manual

Audix Mikrofon ADX51

Læs gratis den danske manual til Audix ADX51 (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Audix ADX51, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ADX51

OVERVIEW:

The ADX51 is a professional pre-polarized condenser microphone

used for stage, studio and broadcast applications. The ADX51 is

known for its clear, accurate response and exibility to handle close

or distance miking for a wide variety of acoustic instruments.

Characterized with a uniformly controlled cardioid polar pattern,

the ADX51 is designed to capture the acoustics of the instrument

being miked while at the same time isolating it from the rest of the

instruments on stage. With a wide frequency range of 40 Hz - 18

kHz, the ADX51 also features a 14 mm gold vapor diaphragm and a

-10 dB pad and bass roll-off lter.

The ADX51 is very easy to position, durable and manufactured

with high standards and tight tolerances. Roadworthy construction

includes a precision machined brass body, black e-coat nish,

laser etched model and serial number, steel mesh grill, gold XLR

connector and a tension-t heavy duty nylon mic clip. FEATURES:

Excellent multi-purpose instrument microphone

Can be used for close or distance miking

Machined brass housing

-10 pad bass roll-off filter

Roadworthy construction

APPLICATIONS:

Acoustic instruments

Cymbals, drum overhead

High hat, percussion table

Group vocal, spoken word

Ambient room miking

Audience mics for ear monitors

SUPPLIED ACCESSORIES:

Tension-fit heavy duty nylon mic clip (DCLIP)

External Foam Windscreen (WS-81)

Carrying pouch (P1)

OPTIONAL ACCESSORIES:

DFLEX - All purpose percussion clamp

DVICE - Spring loaded rim mount clamp

DCLAMP - Tension rod mic clamp

CBL-20 - 20’ XLR - XLR mic cable

CBL-DR25 - 25’ right angle XLR-XLR mic cable

SMT-25 - Shockmount suspension clip

APS-2 - Two-channel phantom power supply

CONDENSER INSTRUMENT MICROPHONE

ADX51

Instrument Condenser

ADX51 on SMT-25 DCLIP DFLEX APS-2 CBL-20

SPECIFICATIONS: ARCHITECTS AND ENGINEERS SPECIFICATIONS:

The microphone shall be a back plate pre-polarized condenser with a cardioid polar pattern. The

microphone shall operate on 9-52 Volts phantom power and the nominal output impedance shall be

equal to 100 ohms at 1 kHz. The microphone shall have switches for -10 dB pad and bass roll-off

lter and shall have a sensitivity of 17 mV / Pa at 1 kHz. The microphone shall have a maximum SPL

level of 132 dB with a THD of 0.5%. The microphone shall be machined from brass with dimensions

of 19.5 mm in diameter and 160 mm in length. The microphone shall be the Audix ADX51.

OPERATION:

The ADX51 will NOT operate without phantom power voltage (48 Volts recommended) which is

available on most professional mic preamps and mixing devices. If phantom power is not available

on your equipment, you will have to purchase a phantom power supply (such as the Audix APS-2).

Avoid plugging or unplugging the microphone from a PA system unless the channel is muted or the

volume of the system is turned down. Failure to do so may result in a loud “popping” noise which

could seriously damage the speakers in the PA system.

Pad and Roll-Off: These recessed switches are located towards the bottom of the mic. You will

need either a miniature screw driver or a pen to move them down (engaged) or up (not engaged).

Pad: The switch on the lower left side of the mic is a -10 dB pad. This means you can reduce the

input level of the mic by 10 dB. This is very helpful for miking extremely loud instruments (guitars,

drums, horns) that may tend to drive the mic into distortion. Note that the feature is active when the

switch is in the down position.

Bass Roll-Off: This feature gently rolls off the bass frequencies starting at 150 Hz which is very

helpful in reducing boominess for voice or instrument. Note that the feature is active when the switch

is in the down position.

USER TIPS:

The ADX51, an excellent choice to mic any kind of acoustic instrument, has a cardioid pick-up

pattern which helps to eliminate sound from other instruments on stage from “bleeding” into the

microphone. However, the ADX51 is much more sensitive than a dynamic and will pick-up sound

from a greater distance. The acoustic nature of the instrument being miked along with how loud it is

will determine how far the microphone should be from the sound source. For example, the ADX51

can be placed 1-2 feet above the cymbals of a drum kit and still pick up plenty of sound , whereas

for a high-hat, the mic will need to be placed within 4-6 inches to be effective.

Allow a distance of 2-3 feet between microphones to avoid phase issues.

*Further miking techniques may be found on our website at www.audixusa.com

www.audixusa.com Call: 503-682-6933 Fax: 503-682-7114

Audix Corporation 9400 SW Barber Street, Wilsonville, OR 97070

FREQUENCY / POLARS:

SERVICE AND WARRANTY:

This microphone is under warranty for

a period of 3 years from any and all

manufacturing defects. Should your

microphone fail in any way, please

contact the Audix Service department

at 503-682-6933. A Return Authoriza-

tion number is required before returning

any products.

Transducer Type Pre-polarized condenser

Frequency Response 40 Hz - 18 kHz

Polar Pattern Cardioid

Output Impedance 100 ohms

Sensitivity 17 mV / Pa @ 1k

Capsule Technology Black plate electret

Off Axis Rejection >15 dB

Maximum SPL ≥132 dB

Power Requirements 9-52 volts phantom

Connector 3 pin gold plated

male XLR connector

Polarity Positive pressure on diaphragm

produces positive voltage on pin

2 relative to pin 3 of output

XLR connector

Housing / Finish Brass /

Black E-Coat

Weight 184 g / 6.5 ounces

Length 160 mm / 6.3 inches

To register your

microphone, please visit

www.audixusa.com

CARE AND MAINTENANCE:

The ADX51 is manufactured to exacting

specs with roadworthy construction. However,

the capsule is highly sensitive and should be

handled with care. Avoid extreme temperatures

and be sure to store your microphone in the

pouch provided when not in use. Moisture of

any kind can adversely affect the sound and

performance of your microphone.

***All specications subject to change without notice.

DIMENSIONS (mm):

ADX51

Produkt Specifikationer

Mærke:	Audix
Kategori:	Mikrofon
Model:	ADX51

Har du brug for hjælp?

Hvis du har brug for hjælp til Audix ADX51 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrofon Audix Manualer

Audix ADS48 Manual

28 December 2024

Audix M63 Manual

5 September 2024

Audix M45 Shortgun Manual

5 September 2024

Audix M55D Manual

2 September 2024

Audix M40 Manual

30 August 2024

Audix M55WO Manual

21 August 2024

Audix M40W12HC Manual

21 August 2024

Audix OM2 Manual

21 August 2024

Audix Fireball Manual

21 August 2024

Audix M3WHM Manual

21 August 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Godox MoveLink II Manual

31 Juli 2025

Godox WEC Manual

31 Juli 2025

Godox WES1 RX Manual

31 Juli 2025

Godox ML II-C4 Manual

31 Juli 2025

Godox VS-Mic Manual

31 Juli 2025

Zoom SSH-6e Manual

31 Juli 2025

Sennheiser Digital 6000 Manual

30 Juli 2025

JLab JBuds Talk Manual

30 Juli 2025

JLab Epic Talk Manual

30 Juli 2025

The T.bone free solo HT 863 Manual

30 Juli 2025