Avantco 177SL713A Manual

Avantco Skæremaskine 177SL713A

Læs gratis den danske manual til Avantco 177SL713A (15 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Avantco 177SL713A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

User Manual

www.AvantcoEquipment.com 1

Meat Slicer Instruction Manual

Models: 177SL612A, 177SL713A

Please read and keep these instructions. Indoor use only.

02/2022

User Manual

2 www.AvantcoEquipment.com

Unpacking:

Unpack the product and check for any damage incurred during transit. This should be reported to the responsible

carrier, railway or postal authority, and a request for a damage report should be made.

These instructions must be followed for us to guarantee our full support of your claim for

protecting against loss from concealed damage. The form for filing such a claim will be

provided by the carrier.

General Installation And Operation

Instructions:

The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the

highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and

reliable operation and use.

1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.

The supporting table should be stable and at the correct working height. The work surface should be in a dry location

and preferably away from heavy trafc areas.

2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-

structions on page 3 of this manual.

3. Set the thickness of slice required using the control knob adjacent to the on/off switch.

4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place

the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position

now on top of the meat to be sliced.

5. The unit can be operated in either MANUAL or AUTO feed modes.

5.1 MANUAL MODE

Ensure the control lever H in diagram 1 is position A. This handle disengages

auto feed function.

Switch on the blade motor only and using the handle on the food pusher, push

the carriage back and forth to

begin cutting the food.

5.1 AUTO FEED MODE

Ensure the control lever H in diagram 1 is in position B. This handle engages

the auto feed function.

Switch on the blade motor rst and then the auto feed motor. The unit will now

automatically cut the meat oaded.

6. After you are nished cutting, turn off machine and collect the product slices in the exit area.

Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot

and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially

designed for the institutional environment with its super concentrated, high active, high

sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.

Diagram 1

A B

Produkt Specifikationer

Mærke:	Avantco
Kategori:	Skæremaskine
Model:	177SL713A

Har du brug for hjælp?

Hvis du har brug for hjælp til Avantco 177SL713A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skæremaskine Avantco Manualer

Avantco 177SL713MAN Manual

29 Juni 2025

Avantco 177SL612A Manual

29 Juni 2025

Avantco 177SL713A Manual

28 Juni 2025

Avantco 177SL512 Manual

26 Juni 2025

Avantco SL512 Manual

12 Juni 2025

Avantco SL713A Manual

11 Juni 2025

Avantco SLC330 Manual

11 Juni 2025

Avantco SL612A Manual

29 December 2024

Avantco SL309 Manual

16 August 2024

Avantco SL310 Manual

13 August 2024

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

Graef S32100 Manual

29 Juni 2025

Dedra DED7518 Manual

29 Juni 2025

Eurel BasicLine RS42 Manual

23 Juni 2025

Eurel TrendLine RS72 Manual

22 Juni 2025

Eurel PremiumLine RS92 Manual

22 Juni 2025

Eurel TrendLine RS74 Manual

21 Juni 2025

Eurel BasicLine RS44 Manual

21 Juni 2025

Eurel BasicLine RS46 Manual

21 Juni 2025

Eurel PremiumLine RS94 Manual

21 Juni 2025

Choice 40710WDG Manual

20 Juni 2025