Avantco SL713A Manual
Avantco
Skæremaskine
SL713A
Læs nedenfor 📖 manual på dansk for Avantco SL713A (15 sider) i kategorien Skæremaskine. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2.5 brugere
Side 1/15
User Manual
www.AvantcoEquipment.com 1
Meat Slicer Instruction Manual
Models: 177SL612A, 177SL713A
Please read and keep these instructions. Indoor use only.
02/2022
User Manual
User Manual
2 www.AvantcoEquipment.com
Unpacking:
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage report should be made.
These instructions must be followed for us to guarantee our full support of your claim for
protecting against loss from concealed damage. The form for filing such a claim will be
provided by the carrier.
General Installation And Operation
Instructions:
The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the
highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and
reliable operation and use.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
The supporting table should be stable and at the correct working height. The work surface should be in a dry location
and preferably away from heavy trafc areas.
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-
structions on page 3 of this manual.
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
now on top of the meat to be sliced.
5. The unit can be operated in either MANUAL or AUTO feed modes.
5.1 MANUAL MODE
Ensure the control lever H in diagram 1 is position A. This handle disengages
auto feed function.
Switch on the blade motor only and using the handle on the food pusher, push
the carriage back and forth to
begin cutting the food.
5.1 AUTO FEED MODE
Ensure the control lever H in diagram 1 is in position B. This handle engages
the auto feed function.
Switch on the blade motor rst and then the auto feed motor. The unit will now
automatically cut the meat oaded.
6. After you are nished cutting, turn off machine and collect the product slices in the exit area.
!
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot
and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially
designed for the institutional environment with its super concentrated, high active, high
sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.
Diagram 1
A B
H
Produkt Specifikationer
| Mærke: | Avantco |
| Kategori: | Skæremaskine |
| Model: | SL713A |
Har du brug for hjælp?
Hvis du har brug for hjælp til Avantco SL713A stil et spørgsmål nedenfor, og andre brugere vil svare dig
Skæremaskine Avantco Manualer
12 Juni 2025
11 Juni 2025
11 Juni 2025
29 December 2024
16 August 2024
13 August 2024
11 August 2024
Skæremaskine Manualer
- Skæremaskine Westmark
- Skæremaskine Princess
- Skæremaskine Quigg
- Skæremaskine Gourmetmaxx
- Skæremaskine OK
- Skæremaskine Trebs
- Skæremaskine Makita
- Skæremaskine Emga
- Skæremaskine Ozito
- Skæremaskine Toolland
- Skæremaskine Ovela
- Skæremaskine Venga
- Skæremaskine Magic Chef
- Skæremaskine Exquisit
- Skæremaskine Zelmer
Nyeste Skæremaskine Manualer
13 Juni 2025
13 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025