Avantco SLC330 Manual
Avantco
Skæremaskine
SLC330
Læs nedenfor 📖 manual på dansk for Avantco SLC330 (15 sider) i kategorien Skæremaskine. Denne guide var nyttig for 6 personer og blev bedømt med 4.4 stjerner i gennemsnit af 3.5 brugere
Side 1/15
1 www.AvantcoEquipment.com
Meat Slicer Instruction Manual
Models: SL309, SL310, SL312, SL512, SL713
Please read and keep these instructions. Indoor use only.
09/2022
User Manual
User Manual
2 www.AvantcoEquipment.com
Unpacking:
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage report should be made.
These instructions must be followed for us to guarantee our full support of your claim for
protecting against loss from concealed damage. The form for filing such a claim will be
provided by the carrier.
General Installation And Operation
Instructions:
The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the
highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and
reliable operation and use.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
The supporting table should be stable and at the correct working height. The work surface should be in a dry location
and preferably away from heavy trafc areas.
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-
structions on page 3 of this manual.
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
now on top of the meat to be sliced.
5. Switch on the motor, and using the handle on the food pusher, push the carriage back and forth to begin cutting the food.
6. After you are nished cutting, turn off machine and collect the product slices in the exit area.
7. Please Note: The blade-sharpening device is NOT factory tted on MODELS SL310, SL312 SL512 AND SL713MAN. To t,
follow the procedure below.
a) Fit the sharpening device in the socket provided, ensuring the grinding stones are positioned at the rear of the machine.
b) Tighten the safety locking screw.
To replace the belt, please remove the knife and motor, then remove belt through the hole under the knife. Then, install the
new belt and reassemble.
!
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot
and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially
designed for the institutional environment with its super concentrated, high active, high
sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.
Produkt Specifikationer
| Mærke: | Avantco |
| Kategori: | Skæremaskine |
| Model: | SLC330 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Avantco SLC330 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Skæremaskine Avantco Manualer
12 Juni 2025
11 Juni 2025
11 Juni 2025
29 December 2024
16 August 2024
13 August 2024
11 August 2024
Skæremaskine Manualer
- Skæremaskine Gourmia
- Skæremaskine Wilfa
- Skæremaskine Clatronic
- Skæremaskine Nutrichef
- Skæremaskine Coline
- Skæremaskine Westmark
- Skæremaskine Arendo
- Skæremaskine Ovela
- Skæremaskine Toolland
- Skæremaskine Weston
- Skæremaskine Siemens
- Skæremaskine Eta
- Skæremaskine Sunbeam
- Skæremaskine Saro
- Skæremaskine Proficook
Nyeste Skæremaskine Manualer
13 Juni 2025
13 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025