Avantco SL309 Manual

Avantco Skæremaskine SL309

Læs gratis den danske manual til Avantco SL309 (15 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Avantco SL309, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/15
1 www.AvantcoEquipment.com
Meat Slicer Instruction Manual
Models: SL309, SL310, SL312, SL512, SL713
Please read and keep these instructions. Indoor use only.
09/2022
User Manual
User Manual
2 www.AvantcoEquipment.com
Unpacking:
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage report should be made.
protecting against loss from concealed damage. The form for filing such a claim will be
provided by the carrier.
General Installation And Operation
Instructions:
The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the
highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and
reliable operation and use.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
The supporting table should be stable and at the correct working height. The work surface should be in a dry location
and preferably away from heavy trafc areas.
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-
structions on page 3 of this manual.
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
now on top of the meat to be sliced.
5. Switch on the motor, and using the handle on the food pusher, push the carriage back and forth to begin cutting the food.
6. After you are nished cutting, turn off machine and collect the product slices in the exit area.
7. Please Note: The blade-sharpening device is NOT factorytted on MODELS SL310, SL312 SL512 AND SL713MAN. To t,
follow the procedure below.
a) Fit the sharpening device in the socket provided, ensuring the grinding stones are positioned at the rear of the machine.
b) Tighten the safety locking screw.
To replace the belt, please remove the knife and motor, then remove belt through the hole under the knife. Then, install the
new belt and reassemble.
!
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot
and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially
designed for the institutional environment with its super concentrated, high active, high
sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.

Produkt Specifikationer

Mærke: Avantco
Kategori: Skæremaskine
Model: SL309

Har du brug for hjælp?

Hvis du har brug for hjælp til Avantco SL309 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skæremaskine Avantco Manualer

Avantco

Avantco 177SL713MAN Manual

29 Juni 2025
Avantco

Avantco 177SL612A Manual

29 Juni 2025
Avantco

Avantco 177SL713A Manual

28 Juni 2025
Avantco

Avantco 177SL512 Manual

26 Juni 2025
Avantco

Avantco SL512 Manual

12 Juni 2025
Avantco

Avantco SL713A Manual

11 Juni 2025
Avantco

Avantco SLC330 Manual

11 Juni 2025
Avantco

Avantco SL612A Manual

29 December 2024
Avantco

Avantco SL309 Manual

16 August 2024
Avantco

Avantco SL310 Manual

13 August 2024

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

Zelmer

Zelmer Jola ZFS1016 Manual

13 September 2025
Zelmer

Zelmer Alicja ZFS1017 Manual

13 September 2025
Bosch

Bosch GOP 40-30 Professional Manual

12 September 2025
Axis

Axis AX-S12 Ultra Manual

10 September 2025
Optimum

Optimum RK-1600 Manual

10 September 2025
Electrolux

Electrolux TRK70 Manual

9 September 2025
Axis

Axis AX-S14 Ultra Manual

9 September 2025
Primo

Primo PS-12D Manual

9 September 2025
Graef

Graef Master M94 Manual

7 September 2025
Russell Hobbs

Russell Hobbs Aura Slice & Go Multi 22281-56 Manual

7 September 2025