AXESS 99-3012G Manual


Læs gratis den danske manual til AXESS 99-3012G (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om AXESS 99-3012G, eller vil du spørge andre brugere om produktet?

Side 1/16
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 6/7/22 INST99-3012G
I N S TA L L AT I O N I N S T R U C T I O N S
99-3012G
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted gray to match the factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • E) (4) Panel clips • F) Axxess interface and wiring harness (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32” socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
Axxess Interface Installation .................................4
WIRING & ANTENNA CONNECTIONS
Wiring Harness:
Visit metraonline.com for audio/
video and steering wheel control interface options.
Antenna Adapter:
40-EU55
A B C ED
Chevrolet Sonic 2012-2016
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
1. Unclip and remove the panel
surrounding the radio/climate controls.
(Figure A)
2. Remove (4) 9/32” screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure B)
Continue to kit preparation
DASH DISASSEMBLY KIT PREPARATION
(Figure A) (Figure A)
(Figure B)
1. Unclip the A/C vents from the factory
radio/climate control panel.
2. Clip the vents into the 99-3012G radio
trim panel. (Figure A)
3. Attach the (4) supplied onto panel clips
the panel.
Continue to kit assembly


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: 99-3012G

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS 99-3012G stil et spørgsmål nedenfor, og andre brugere vil svare dig