AXESS 99-5825S Manual

AXESS Ikke kategoriseret 99-5825S

Læs gratis den danske manual til AXESS 99-5825S (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om AXESS 99-5825S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

INSTALLATION INSTRUCTIONS FOR PART 99-5825

APPLICATIONS

REV. 12/19/2019 INST99-5825

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in

beforereconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

• ISO DIN radio provision

• Driver information circuits and buttons

• Painted Silver or Matte Black to match factory finish

• A) Radio Housing • B) Radio ISO Brackets • C) (6) #8 x 3/8” Phillips truss head screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • XSVI-5524-NAV Ford interface 2011-up

Antenna Adapter: • 40-EU10 multi-app adapter

• Panel removal tool • Phillips screwdriver • Socket Wrench • Cutting Tool

TOOLS REQUIRED

A CB

Dash Disassembly

– Ford Fiesta 2011-Up 2 ............................................

Kit Assembly

– ISO DIN radio provision......................................... 3

NOTE: This kit comes pre-programmed for vehicles

equipped with SYNC. It will not operate properly in vehicles

equipped without SYNC unless it is programmed.

Programming for vehicles without SYNC:

1. Turn on the ignition.

2. Press and hold the kit’s menu button for

ten seconds.

3. Release the menu button and test the kit’s buttons

for proper operation.

99-5825

1. Unsnap and remove the panel

over the display at the top of

the dash. (Figure A)

2. Remove two 7 mm hex screws

from the top of the radio panel.

(Figure B)

3. Unclip and remove the radio

trim panel including the vents.

(Figure C)

Dash Disassembly

(Figure D)

(Figure A)

(Figure E)

(Figure B)

(Figure F)(Figure C)

4. Remove two 7 mm hex holding

radio and radio chassis together

(from top of panel). (Figure D)

5. Remove two T-20 Torx and unclip

the two vents from the factory

radio panel. (Figure E)

6. Remove two T-20 Torx from

passenger airbag light and remove

it. (Figure E)

7. A small cut is required in the sub

dash for clearance. (Figure F)

Continue to kit assembly

Produkt Specifikationer

Mærke:	AXESS
Kategori:	Ikke kategoriseret
Model:	99-5825S

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS 99-5825S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret AXESS Manualer

AXESS AXBUCH-MZ6V Manual

29 Juli 2025

AXESS AXABH-CH3 Manual

29 Juli 2025

AXESS AXDSPX-HK5 Manual

25 Februar 2025

AXESS AXAMP-CH8 Manual

25 Februar 2025

AXESS AXTC-MZ1 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM26V Manual

25 Februar 2025

AXESS AXAMP-FD2 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM36V Manual

25 Februar 2025

AXESS AXAMP-TY1 Manual

25 Februar 2025

AXESS AXAMP-TY4 Manual

25 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-711-OX Manual

30 Juli 2025

Intellinet 713108 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Advantech PCIE-1753 Manual

30 Juli 2025

MXR Rockman X100 Manual

30 Juli 2025

MIPRO MI-909R Manual

30 Juli 2025

Advantech AMAX-4870 Manual

30 Juli 2025

Advantech IDK-1112P-50XGA2 Manual

30 Juli 2025

MIPRO MP-820 Manual

30 Juli 2025

Advantech ARES-12290 Manual

30 Juli 2025