AXESS 99-7389B Manual


Læs gratis den danske manual til AXESS 99-7389B (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 70 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 35.5 anmeldelser. Har du et spørgsmål om AXESS 99-7389B, eller vil du spørge andre brugere om produktet?

Side 1/16
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 9/14/22 INST99-7389B
I N S TA L L AT I O N I N S T R U C T I O N S
99-7389B
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) Climate display • E) (2) #8 x 3/8” Phillips screws • F) Wiring harness (not shown) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Pick tool
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation ...................................................4-6
Kit Assembly ..........................................................7
Wiring Instructions ...........................................8-15
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Included with kit
Antenna Adapter: Included with kit
A CB D
E
Kia Sportage (with auto climate control w/o factory amplifier)
2017-2019
KIT FEATURES
Visit for more detailed information about the product and up-to-date vehicle
MetraOnline.com
specific applications
ISO DDIN radio provision
ISO DIN radio provision with pocket
Integrated electronics with laser
etched graphics retain the factory
climate control display features.
Retains factory steering wheel
controls and back up camera.
• Painted scratch resistant matte black.
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and slide the top of the center
console back slightly. (Figure A)
2. Unclip and remove the panel on the
end of the passenger side of the dash,
then remove (1) Phillips screw exposed.
(Figure B)
3. Unclip the panel above the glove box.
Unplug the passenger airbag light, then
remove the panel. (Figure C)
4. Remove (2) Phillips screws securing the
radio display and a/c vent panel, then
unclip and remove the panel. (Figure D)
Continued on the next page
(Figure A) (Figure C)
(Figure B) (Figure D)


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: 99-7389B

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS 99-7389B stil et spørgsmål nedenfor, og andre brugere vil svare dig