AXESS 99-7625B Manual


Læs gratis den danske manual til AXESS 99-7625B (32 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 17 anmeldelser. Har du et spørgsmål om AXESS 99-7625B, eller vil du spørge andre brugere om produktet?

Side 1/32
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 11/14/22 INST99-7625B
I N S TA L L AT I O N I N S T R U C T I O N S
99-7625B
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel with HVAC controls • B) Radio brackets • C) Upper keypad • D) Pocket • E) (2) Panel clips • F) (6) #8 x 3/8” Phillips screws
• Axxess interface and harness (not shown) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx driver
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
-ISO DIN radio provision with pocket ...................5
-ISO DDIN radio provision......................................6
Axxess Interface Installation ............................7-12
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness:
Included with kit.
Antenna Adapter: 40-NI12
A B
F
C D E
Infiniti G37 2008-2013
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
(Figure B) (Figure D)
(Figure A) (Figure C)
DASH DISASSEMBLY
1. Slide the shifter boot down and remove
clip holding shifter knob and remove
shifter knob. (Figure A)
2. Unclip and remove shifter boot trim
panel. (Figure B)
3. Remove (2) screws at the bottom of the
radio/climate control panel and remove
panel. (Figure C)
4. Remove (2) screws at the bottom of the
factory display panel and remove panel
with the vents. (Figure D)
Continued on next page


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: 99-7625B

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS 99-7625B stil et spørgsmål nedenfor, og andre brugere vil svare dig