AXESS AXABH-HN1 Manual


Læs gratis den danske manual til AXESS AXABH-HN1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 18 anmeldelser. Har du et spørgsmål om AXESS AXABH-HN1, eller vil du spørge andre brugere om produktet?

Side 1/4
AXABH-HN1
I N S TA L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/30/20 INSTAXABH-HN1
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
TABLE OF CONTENTS
Amplifier locations ................................................2
Connections ............................................................3
Honda Amplifier Bypass Harness 2016-Up
• Amplifier bypass harness
• Vehicle-specific harness to bypass the factory amplifier
• Allows loose wires to wire to an aftermarket amplifier
• Saves the installer unnecessary labor and wire
APPLICATIONS
Honda
Accord 2018-Up
Civic 2016-2018
CR-V 2017-2018
Insight 2019-Up
Pilot 2016-2018
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications
FEATURES
2
AMPLIFIER LOCATIONS
Vehicle Amp Location
Accord Center console, close to firewall
Civic Passenger kick panel, up high
CR-V Under gear selector in center console
Insight Passenger kick panel, up high
Pilot Passenger kick panel, up high


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: AXABH-HN1

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXABH-HN1 stil et spørgsmål nedenfor, og andre brugere vil svare dig