AXESS AXABH-TY3 Manual


Læs gratis den danske manual til AXESS AXABH-TY3 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 11 anmeldelser. Har du et spørgsmål om AXESS AXABH-TY3, eller vil du spørge andre brugere om produktet?

Side 1/4
AXABH-TY3
I N S TA L L AT I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/20/25 INSTAXABH-TY3
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
TABLE OF CONTENTS
Amplifier Location 2 .................................................
Amplifier Bypass Harness
Fits Select Toyota Models 2004-2015
• Vehicle-specific harness to bypass the factory amplifier
• Saves the installer unnecessary labor and wire
• 20 gauge wires
• Wire Length: 12”
Visit for more detailed information about the product AxxessInterfaces.com
and up-to-date vehicle specific applications
ATTENTION: With the key out of the ignition, disconnect
the negative battery terminal before installing this
product. Ensure that all installation connections,
especially the air bag indicator lights, are plugged in
before reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included with the
aftermarket accessory before installing this device.
APPLICATIONS
Toyota
Land Cruiser (without NAV) 2008-2015 ............................
Amplifier Location: Under Driver seat carpet
Tundra 2004-2013 ...............................................................
Amplifier Location: Below Passenger’s Seat
FEATURES


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: AXABH-TY3

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXABH-TY3 stil et spørgsmål nedenfor, og andre brugere vil svare dig