AXDI-SP1
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 8/8/23 INSTAXDI-SP1
ATTENTION: With the key out of the
ignition, disconnect the negative battery
terminal before installing this product.
Ensure that all installation connections,
especially the air bag indicator lights, are
plugged in before reconnecting the battery
or cycling the ignition to test this product.
NOTE: Refer also to the instructions
included with the aftermarket accessory
before installing this device.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Connections 2-3 ........................................................
LD-AXVI-SP1 DIAGRAM 2 ......................................
LD-AXVI-SP2 DIAGRAM 3 .....................................
Installation 4 .............................................................
Programming 4 .........................................................
Dodge/Mercedes/Freightliner
Accessory and NAV Outputs 2007-UP
• Provides accessory (12-volt 10-amp)
• Retains R.A.P. (Retained Accessory Power)
•
Provides wires for multimedia radios (park brake, reverse, speed sense)
• Prewired AXSWC harness included+ (AXSWC sold separately)
• High level speaker input
• USB updatable
• AXDI-SP1 interface
• LD-AX-XSVI-SP1 harness
• LD-AX-XSVI-SP2 harness
APPLICATIONS
Dodge
Sprinter 2007 ....................................................
Sprinter (Sound 5 radio) 2008-2009 ...............
Mercedes
Sprinter (Sound 5 radio) 2010-2013 ................
Freightliner
Sprinter 2007 ....................................................
Sprinter (Sound 5 radio) 2008-UP ..................
Visit
AxxessInterfaces.com
for more detailed information about the product
and up-to-date vehicle specific applications