AXESS AXDSPL-SP Manual


Læs gratis den danske manual til AXESS AXDSPL-SP (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om AXESS AXDSPL-SP, eller vil du spørge andre brugere om produktet?

Side 1/1
AXDSPL-SP
INSTALLATION I NSTRUC T IONS
REV. 5/1/20
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
16-pin Header
AX-DSPL-SP
AX-DSPL-SP
The AXDSPL-SP will be used for adding a
Toslink digital output to the AXDSP-L.
1. Unplug the
Important! AXDSP-L from the vehicle.
2. Remove (4) Phillips screws securing the AXDSP-L interface, then
remove the top cover, exposing the circuit board within.
3. Locate the 16-pin header on the circuit board.
4. Carefully line up the header pins to the Toslink
Important!
interface, with the Toslink port facing outward. Gently press
down to secure.
Both interfaces may be damaged if installed wrong.Note:
5. Reinstall the top cover provided with the AXDSPL-SP to complete
the installation.


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: AXDSPL-SP

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXDSPL-SP stil et spørgsmål nedenfor, og andre brugere vil svare dig