AXESS AXLOC-BM1 Manual


Læs gratis den danske manual til AXESS AXLOC-BM1 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om AXESS AXLOC-BM1, eller vil du spørge andre brugere om produktet?

Side 1/8
AXLOC-BM1
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 12/15/22 INSTAXLOC-BM1
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the
ignition to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip-ties
TABLE OF CONTENTS
Applications.............................................................1
Installation ............................................................. 2
Diagram .................................................................. 3
APPLICATIONS
BMW
3-Series 2002-2006
5-Series 2001-2003
M3 2002-2006
X3 2004-2010
X5 2001-2006
Z4 2003-2008
Mini
Clubman 2008-2014
Convertible 2009-2015
Coupe 2012-2015
Hatchback 2007-2013
Roadster 2012-2015
Volkswagon
Beetle 2012-2015
CC 2009-2017
EOS 2007-2016
Golf 2002-2014
GTI 2006-2014
Jetta 2002-2015
Jetta Sportwagon 2010-2014
Passat 2002-2015
R32 2007-2008
Tiguan 2009-2015
Toureg 2004-2010
KIT COMPONENTS
• AXLOC-BM1 Wiring Harness
• Gain Controller
• 12v-500mA Remote Wire
• Auxiliary Cable
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications.
• Designed to provide (2) channels of low-level audio output from the factory system.
• Allows for the installation of an amplifier for speakers or subwoofers.
• Gain Controller included to adjust the overall output.
• 12v-500mA remote wire activated with signal sense.
• 55-watts per channel.
• Designed for non-amplified vehicles.
Note: A single pole double throw (SPDT) relay is recommended when installing multiple amplifiers.
BMW/MINI/VW LOC (Line Output Converter)
AXLOC-BM1 (for Non-Amplified Vehicles) 2001-2017
For dash disassembly instructions, refer to metraonline.com. Enter the year, make, and model of the vehicle in the for .Vehicle Fit Guide Radio Install Kits


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: AXLOC-BM1

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXLOC-BM1 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret AXESS Manualer

AXESS

AXESS AXDSPX-HK3 Manual

22 August 2025
AXESS

AXESS AXDSPX-FD2 Manual

22 August 2025
AXESS

AXESS AXDSPX-HN3 Manual

22 August 2025
AXESS

AXESS AXI-RGB3 Manual

22 August 2025
AXESS

AXESS AXI-MBEIRC-R Manual

22 August 2025
AXESS

AXESS AXDSPX-GL10 Manual

22 August 2025
AXESS

AXESS AXDSPX-HK2 Manual

22 August 2025
AXESS

AXESS AXDSPX-GM31 Manual

22 August 2025
AXESS

AXESS AXI-FL24-R Manual

22 August 2025
AXESS

AXESS AXUSB-CBL Manual

22 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Waterstone

Waterstone 7800 Manual

11 December 2025
Kwikset

Kwikset 258 Manual

11 December 2025
Schlage

Schlage F170 Manual

11 December 2025
Moen

Moen Align 7565EV Manual

11 December 2025
ALNO

ALNO MC10244 Manual

11 December 2025
JET

JET TAK-ZX Manual

11 December 2025
Waterstone

Waterstone 1455 Manual

11 December 2025
Laica

Laica NE2015 Manual

11 December 2025